DYZ Integral hydraulic Rama (Puller)

DYZ Integral hydraulic Rama (Puller) Jinan, China Coal Mining Equipment Co., Ltd. is a professional manufacturer, good product quality, service and good attitude, delivery speed, you are welcome to establish long-term partnerships. First, the product description rod hydraulic Rama is a direct hydraulic start moving forward, so the push rod itself is not for turning. Hook claw can be made directly with the thread pitch of the forward and back, before the operation as long as the handle minor swing, hydraulic rod start forward, the corresponding hook claw back, the object is pulled out. Hydraulic Rama Rama is an ideal alternative to traditional new tools. DYZ overall Puller (integrated hydraulic Rama) is a hydraulic actuating lever straight forward movement, so the push rod itself is not for the drive, the hook claw can be made directly with the thread pitch of the forward and back, easy to operate, as long as the around the handle minor swing. The use of labor-saving, non-slip, from the site, the direction (0-360 °), position (2 feet, 3 feet) limit, is widely used in the demolition of various discs, flanges, gears, bearings, pulleys, etc. It is the ideal tool for an alternative to traditional Rama. Second, the product features easy operation, use and effort, subject to site constraints, Rama structure is compact, flexible, light weight, small size, easy to carry, suitable for factory repair place. Third, the technical parameters Model DYZ-5 DYZ-10 DYZ-20 DYZ-30 DYZ-50 Max capacity (T) 5 5 16 25 45 single working stroke (mm) 60 60 60 60 100 jaw adjustment range (mm ) 50-250 50-250100-400 150-500200-550 working pressure MPa 40 63 63 63 70 Fourth, the working principle of hydraulic rod Rama is a direct hydraulic start moving forward, so the push rod itself is not for turning. Hook claw can be made directly with the thread pitch of the forward and back, before the operation as long as the handle minor swing, hydraulic rod start forward, the corresponding hook claw back, the object is pulled out. Fifth, the application of hydraulic Rama is an idealized new tools Classic Rama instead. Easy to operate, effort, subject to site constraints, Rama structure is compact, flexible, light weight, small size, easy to carry, suitable for factory repair place. Sixth, the use of methods and precautions 1, when using the slotted end of the handle first set into the oil return valve stem and valve stem in a clockwise direction back to tighten the oil. 2, the hook claw to claw adjust caught by the drawn objects. 3, the handle into the hole back and forth tilt piston lift hand actuating lever forward smoothly forward, the corresponding hook claw back, the object is pulled out. 4, the hydraulic piston Rama effective from the start bar only 50mm, it stretched from no larger than 50mm, when there is no pull-out stop, release the oil return valve, so that the piston rod is retracted to start using the second after a good tune again Repeat steps 1,2,3 pulled up. 5, purports to retract the piston rod to start, just use the slotted end of the oil return handle counterclockwise slightly loosen the stem, piston rod at spring start gradually retraction. 6, prior to use should be based on the outer diameter of the object is pulled, and pulled away from the loading force, select the appropriate tonnage hydraulic Rama, avoid overloading, to avoid damage. 7, the hydraulic Rama at -5 ℃ ~ 45 ℃ in use, the use of (GB443-84) N15 machine oil; use at -20 ℃ ~ -5 ℃, the use of (GB442-64) synthetic spindle oil. 8, to prevent equipment damage caused by overloading, the hydraulic unit equipped with automatic overload relief valve, when the object is pulled over the rated load, supercharged valve will automatically unloading, and change the choice of a larger tonnage hydraulic Rama. DYF split hydraulic Rama (Puller) Rama, Rama hydraulic, factory direct a product description rod hydraulic Rama is a direct hydraulic start moving forward, so the push rod itself is not for turning. Hook claw can be made directly with the thread pitch of the forward and back, before the operation as long as the handle minor swing, hydraulic rod start forward, the corresponding hook claw back, the object is pulled out. Rama is split hydraulic pressure tubing to connect the power source and Rama, the work can only operate the high-pressure pump. More lightweight and efficient than the overall hydraulic Rama. Second, product use and precautions a, using the slotted end of the handle first set into the oil return valve stem and valve stem in a clockwise direction back to tighten the oil. b, to adjust the hook claw to claw hook to seize the drawn objects. c, hand lift handle into the hole back and forth tilt piston rod forward smoothly start forward, the corresponding hook claw back, the object is pulled out. d, the hydraulic piston Rama effective from the start bar only 50mm, it stretched from no larger than 50mm, when there is no pull-out stop, release the oil return valve, so that the piston rod is retracted to start using the second after a good tune again Repeat steps 1,2,3 pulled up. e, purports to retract the piston rod to start, just use the slotted end of the oil return handle counterclockwise slightly loosen the stem, piston rod at spring start gradually retraction. f, prior to use should be based on the outer diameter of the object is pulled, and pulled away from the loading force, select the appropriate tonnage hydraulic Rama, avoid overloading, to avoid damage. g, this hydraulic Rama at -5 ℃ ~ 45 ℃ in use, the use of (GB443-84) N15 machine oil; use at -20 ℃ ~ -5 ℃, the use of (GB442-64) synthetic spindle oil. h, in order to prevent equipment damage caused by overloading, the hydraulic unit equipped with automatic overload relief valve, when the object is pulled over the rated load, supercharged valve will automatically unloading, and to change the choice of a larger tonnage hydraulic Rama. Second, the technical parameters Model Specification safe load T mm jaw stroke adjustment range mm DYF-5 5 100 50-250 DYF-10 10 125 50-300 DYF-20 20 120 100-450 DYF-30 30 150 200-500 DYF- 50 50 100 250-600 DYF-100 100 160 250-650 MPa Remarks pump rated pressure 63MPa above specifications are three split hydraulic Rama (Hydraulic Puller) application is an alternative to traditional hydraulic Rama Rama idealized new tools. Easy to operate, effort, subject to site constraints, Rama structure is compact, flexible, light weight, small size, easy to carry, suitable for factory repair place. Fourth, the working principle of hydraulic rod Rama is a direct hydraulic start moving forward, so the push rod itself is not for turning. Hook claw can be made directly with the thread pitch of the forward and back, before the operation as long as the handle minor swing, hydraulic rod start forward, the corresponding hook claw back, the object is pulled out.