South China Sea high-frequency automatic brush rigs

Using the operating methods: a main power switch is turned on the electric control box, the machine's electrical control box located on the front lower right of the red button, turning clockwise rotation, then the machine starts to work. Second, the power switch is turned governor on the electrical control box. The green indicator light on the governor. Third, will make a good hot drilling diagram templates stuck in the machine work surface, brush several drill block adjustment nut? Release, the brush block drilling in close contact with hot drilling template and then brush drill a few blocks an adjusting nut tightened, the hot drill bit into the hopper brush. Fourth, depress the foot switch, the machine began to work, after work is completed automatically stop, brush drill bucket stopped at the top, press the pause button during operation of the unit will stop working. Fifth, when the brush drill block finished checking the drawing board material movement after a brush drill drill drill a seamless, anti-drilling phenomena, such as perfect, the hot sticky paper tripping plate. Six drill income and change drilling method: first move the slider to the middle position fast, easy to change brush operation, twisting four nuts optical axis above the slider, the slider while screwing off the front two handle nuts, hands forward with counterweights promote middle attachment brush brush chuck, chuck remove brush, blown clean attached to the chuck and the surrounding brush drilling hot, with a cloth or brush by hand to push the drilling rig drilling hot brush funnel, if stuck in the funnel in the middle, only blowing wind, the inflow of hot drilling to take advantage of income drill drawer.