Supply multi-functional knitting machine knitting machine brand Caolian

Various types of Caolian, grass thatch machine, Po curtain machine, mat, transmission parts all-lever structure, produced by the mat machine, a machine instead of the 50 artificial, as long as the mat placed on semi-finished products table of the machine, starting switch every two minutes a bed (2 meters) from the uniform pitch tight, saving time and effort. Straw, wheat straw, mountain grass, rushes, etc., as raw materials, production and packaging thickness 0.5CM small straw mat, can also produce the greenhouse 5CM thickness of the insulation used straw mat, widely adapted to the shed, brick, to the system works, grass, road, wagon and packaging industries. SMEs personal enrichment machinery. Various types of Caolian, grass thatch machine, Po curtain machine, mat, transmission parts all-lever structure, produced by the mat machine, a machine instead of the 50 artificial, as long as the mat placed on semi-finished products table of the machine, starting switch every two minutes a bed (2 meters) from the uniform pitch tight, saving time and effort. Straw, wheat straw, mountain grass, rushes, etc., as raw materials, production and packaging thickness 0.5CM small straw mat, can also produce the greenhouse 5CM thickness of the insulation used straw mat, widely adapted to the shed, brick, to the system works, grass, road, wagon and packaging industries. Caolian characteristics: a, at the bottom of the rack mounted motor and gear reducer shaft mounted pulley, through the pulley belt strip is connected with the camshaft; side of the rack b, camshaft symmetry a cam mounted on the cam formed with the cam groove, the frame movably mounted on one end of a lever movably connected with the cam groove, the other end of the guide rod slidably connected; c, guide rods movably mounted in the guide rails, symmetrically located on both sides of the rack two guide rods mounted needle plate, the needle plate uniformly fixed hub, install cable needle within the hub; on d, the rack is also equipped with two eccentric gear shaft and front axle, sprocket gear mounted on the shaft and bevel gear, the two ends of the eccentric shaft is mounted in each sprocket and eccentric wheels, sprocket wheel on the camshaft sprocket gear shaft and an eccentric axle is connected by a chain, the two eccentric shaft are connected by a chain sprocket; bevel gear e, gear shaft and another bevel gear, bevel gear which is connected by a shaft with cams, cam machining cam groove; f, on the rack for each line should installation of a shuttle body, the body is mounted shuttle shuttle disk, fixed gear, the gear meshing with the rack below the shuttle plate, rack mounted on the end of the movable cam cam groove; sleeved eccentric on g, four eccentric, the eccentric sleeve has a catcher rod groove, the catcher rod placed between two concentric grooves on the catcher rod; on h, corresponding to each of the hook body is fixed to the pallet rack, pallet feed lever provided on both sides, feeding lever mounting bracket around two poles, on which the feed rod aside.