Mobile wheat grain cleaning machine Sieve Sieve corn dust machine

HYL-25-type grain cleaning screening machine is used for wheat, rice, corn, soybeans, cotton seed, sunflower and other crops cleaning. Aircraft in the number -1 -2 number on the front screen with the Company's production of vibration motors and linear vibrating screen. More than 1-2 first-type cleaning shoe machine further yield 25 tons per hour. Large grain cleaning screens used in this guide: First, the device: 1, should first six support [1] top tight [to] the height of the tire from the leveling device. 2, each of the rotating parts of the device filling hole, [class 8 hours] should bear the butter once, in order to ensure the life of the equipment. 3, the operator should be a detailed understanding and familiarity with the left side of the device three handle [4] [5] [7] use. [7] The main control handle material thickness up material thickness, whereas thin materials. [5] for the control handle pressure handle clockwise pulled a relief, auger a hybrid port, corncobs and moldy seed out of the net rate. Handle [4] is to control scale screen surface discharge port, food purity. Pulled down, gross grain easily flow out from the screen surface, whereas net grain discharge more Note: [handle with the handle [4] [5] Adjustment]. 4, vibration motor [3] to adjust the position of the vertical back 10 ° -17 °. 5, vibration motor rotation direction [3] as a positive and negative. 6, vibration motor vibration inside the block, two pieces together and shake is large, even a small amount of vibration do open it, a small quantity of material. 7, clear grain machine debugging test done at the factory, the installation must be correct, otherwise it will affect the performance or life. Second, the safety precautions; 1, non-hand into the equipment operation site. 2, boot main fan should be running direction of the arrow. 3, the device during operation event of the Electrical and Mechanical failure or abnormal sound, should immediately stop inspection, remove hidden dangers, before normal operation. Equipment maintenance should be professionals, key parts can not be demolished. 4, the shield may not be disassembled. 5, be sure to pay attention to the lock nut must be leveled after six support base before use, the fan running direction of the arrow, when the normal operation of equipment start feeding, consistent on both sides of the screen surface material thickness before starting adjustments Three handle with adjustment, if the material layer side of the thin side of the thick and the thin edge below the support base up top, until leveling, tighten the adjustment handle, the device is working should always check six support base, so as not to loose part of the support base The vibration caused large frame deformation. Company Website: www.songhongxing.com Contact: Song Red Star (Sales Manager) Mobile: 15237357091