LED dimming driver 10A 0-10V dimming high current drive single constant PWM dimming YH ..

Introduction YH-411 dedicated to receiving 0/1 ~ 10V dimming signal, single constant voltage PWM (pulse width modulation) output. It solves compatibility issues LED lamps and traditional fluorescent dimming system, without having to replace the existing regulation by dimming effect can be easily achieved. It requires the use of front-end with a dimmer switch DC12 ~ 24V power supply, back-end driven LED lamps with limited flow design. First, the performance parameters Model: YH-411 Input power: DC12V ~ DC24V (can be customized 5V) signal input: 0/1 ~ 10V dimming signal output or short: single PWM constant maximum load current: 10A Output Power: 120W (12V) / 240W (24V) dimming range: 0 to 100% gray levels: 512 Operating temperature: -35 ℃ -55 ℃ Appearance Material: Silver Aluminum IP Rating: Not waterproof Warranty: 2 years Dimensions : L132 × W65 × H25 (mm) Packing size: L132 × W68 × H28 (mm) Weight (GW): 0.21KG Second, Features 1, supports a wide input voltage DC12V ~ DC24V. 2, support the use of 0/1 ~ 10V signal or the direct buttons shorted dimming. 3, as long as there is 0/1 ~ 10V signal is present, then the signal priority. 4, 10A full load current can work. 5, the dimming level is 512, the luminance level of input from the digital tube display is divided into 1 to 100. 6, with memory function, power is automatically displayed. 7, the button guide as follows: 7-1, touch what is on or off. 7-2, hold the can, brightness to increase or go down. 7-3, when the dimmer output brightness is greater than 0, using a light touch approach to open or close, are to display the current value. 8, can be connected to a power repeater to expand power. Details can add QQ: 2962297466 or Tel: 13824122070 or visit our Taobao shop: http: //shop104515752.taobao.com/shop/view_shop.htm spm = a1z0e.1.10010.3.7BaG2o?