SV-5QH exhaust gas analyzer automotive fault diagnostic factory outlets

SV-5QH Automotive Exhaust Analyzer imported movement of the main technical parameters ◆ use of environmental conditions: temperature: -5 ~ 40 ℃ Humidity: less than 95% atmospheric pressure: 70.0 ~ 106kPa Power: AC220V ± 10%; 50Hz ± 1Hz ◆ Measurement range: CO: 0.00 ~ 10.00% vol HC: 0 ~ 10000ppmvol CO2: 0.00 ~ 20.00% vol A / F: 10.0 ~ 30.0 λ: 0.000 ~ 9.999 O2: 0.00 ~ 25.00% vol NO: 0ppm ~ 5.000ppm vol engine speed (RPM): 0rpm ~ 9990rpm (optional) Oil temperature: 0 ℃ ~ 150 ℃ (optional) ◆ Indication error: CO: ± 0.06% vol HC: ± 12ppm vol CO2: ± 0.5% vol O2: ± 0.1% vol NO: ± 25ppm vol ◆ Warm-up time: 10 minutes ◆ Weight: 9.8kg ◆ Volume: 420 * 320 * 250 (mm) Main Features ■ meet the national GB / T18285-2005 standard. ■ Using imported movement, uses the principle of non-dispersive infrared absorption method, measure vehicle emissions of HC, CO, CO2 analysis by microcomputer, using an electrochemical measurement principle O2, NO concentrations. ■ with idle, two-speed idle test function, it can be equipped with the oil temperature and speed measurements. ■ Configuration 7-inch high-brightness LCD display with support for multilingual operating menu. ■ Automatic calculation, display the value of the excess air ratio λ. ■ equipped with RS-232C digital serial communication interface to facilitate networking. ■ with more than 500 groups of data storage, access function. ■ can configure the printer to print can input and output the license plate number. ■ available for gas detection for natural gas, LPG and gasoline-fueled vehicles three. ■ Configurable car power inverter, easy to carry out vehicle exhaust testing. Scope for vehicle emissions inspection and environmental protection departments, automobile and motorcycle manufacturing, automobile repair business, police testing station, traffic detection stations and research departments of vehicle maintenance, vehicle factual, road inspection and scientific research.