Changsha ground scribing / highway dash

Ding away seven years to undertake professional: shop floor crossed, crossed the floor parking lot, factory floor crossed, crossed the floor price, the warehouse floor garage floor crossed crossed | ground crossed Price | cell surface scribing Product Name: shop floor crossed, crossed the floor parking lot, factory floor crossed, crossed the floor price, the warehouse floor crossed Color: white, yellow (other) parking Specifications: 5000 * 2500 * 150mm crossed Specifications: width 150 -300mm Material: crossed special paint (cold paint, hot melt) crossed the cold floor paint construction process: 1, the use of special road for cold paint coatings, artificial spray, thickness, color and clarity. 2, cold lacquer coating is mainly used for parking, roads, road marking special, dried speed block easy to use. 3, night lights under the irradiation, a good reflective effect of acts. 4, prohibiting construction in wet and frozen ground, the temperature should be above 5 ℃ and humidity below 80% Construction 5, the construction using cold painted, cold painted with fast-drying, clear, vivid, iconic good; high mechanical strength film, weather color retention and washable good; strong adhesion, durable wear; with a strong acid and other chemical corrosion. 6, brush or roller construction method, applied 2 times. With special diluent against the thin, thinner dosage should be controlled at about 5% in order to ensure that the thickness of the film. Conventional thickness of 0.2 ~ 0.5mm. Ground crossed melt construction process: 1, reflective hot melt marking, using glass beads primer, petroleum resin hot melt coating. 2, the paint on the inside hot melt machine heated, melted temperature control between 180 degrees to 220 degrees Celsius, and stir for about 10 minutes after coating. 3, mark the position and measure, according to the position and graphic design icon Ming, and then figure mark applied primer paint. 4, can be carried out after the primer dry hot melt coating, marking coated reflective glass beads while spreading, increase visibility even at night, marking the thickness of 1.5- 1.8MM. Ground melt crossed crossed: 1, adhesive: a unique formula and road surface having good adhesion, painted front crossed under special varnish. The paint and pavement combine more robust. 2, slip resistance: contains slip additives, the coating maintain good flow and leveling, but also has good anti-slip properties, to ensure maximum driving safety. 3, reflective: the refractive index of the consistently high quality glass beads containing a sufficient amount, and according to scientific selection of glass beads sedimentation rate ratio of different particles mixed glass beads, to ensure that old marking maintain a good reflection effect . 4, dry: according to the different construction conditions of different formulations, dried for 3-5 minutes to ensure the opening and maintaining excellent stain resistance. 5. Stability: contains UV additives, and the choice of optical, thermal stability, good raw material preparation, is marking the long-term to maintain the original state and color.