Shanxi Houma 5mm black insulating pad factory direct supply price

Insulation pads are mainly used in the distribution room, substation, laying the ground for distribution facilities, played an insulating effect, the rainy season humidity, insulation protection work is even more important, because under greater rainfall during the rainy season, a lot power distribution room, power distribution room for safety, began using high-level standard of insulation pads, so the demand for the product increased a lot. Many customers tend to buy when insulation pads will ask us how to maintain insulation pads and storage insulation pads, Urumqi, Xinjiang had a customer consultation, before he was to buy a number of green insulation pads buy back pad surface a layer of film, when he thought it was thrown off the protective film so I did not, but later found that the film could have been stuck in the above then do not go already firmly glued to the top, a lot of workers are reflected in the way the film but not slippery. Based on this incident, today I come to tell you about, how to store and maintain insulation pads! ! ! Storage: First insulation pads should be stored in a special tank, avoid direct sunlight, rain and snow Baptist leaching, extrusion and sharp objects to prevent collisions. Prohibition insulation pads oil, acids, alkalis or other harmful substances into contact with, and away from the heat source more than 1m. Storage temperature should be between the pads when you store 10 ℃ ~ 21 ℃ to note the following. 1. The insulating pad storage warehouse is best to choose a good ventilation and relatively dry place. 2. insulation pads storage location away from heat and certain chemicals. 3. insulation pads from the ground and the storage position to the inside wall 20 above. 4. Be sure to avoid direct sunlight on the insulation pads. 5. The other is not the same kind of rubber mat, rubber sheet do with different storage, due to the different types of sulfide body, the molding curing temperature range, there is a considerable gap, even due to climate change, the indoor temperature and humidity impact, thereby changing some of its components, in order to avoid unnecessary impact on the quality of finished rubber plate. Also note that if you buy back the pad surface layer of the film must remember to tear up that layer of film just transport packaging to prevent transportation of sliding, impact insulation pad surface, but when you have to use yer. Conservation: Maintenance, then wash with soap and water every six months once. Insulation pads should be kept dry, clean, pay attention to prevent contact with acid, alkali and various species have to be protected from corrosion in aging, crack or become sticky, thus reducing the insulating properties. Use process insulation pads cracks, scratches, etc. thickness reduction is not enough to ensure the insulation performance that should be replaced. A year to conduct a pressure test if the high pressure chamber is insulated pad, then they would have sent to the local Power Authority security apparatus to detect the test center, the insulating pad test period is one year. ? If a general insulating pad, you can own a megger to measure it.