Jaw Crusher model PE-1000 × 1200

Jaw Crusher This series jaw crusher, a crushing ratio, even granularity, simple structure, reliable operation, easy maintenance, operating costs and economic characteristics. Jaw crusher is widely used in many sectors in mining, smelting, building material, highway, railway, water conservancy and chemical industries, breaking strength not exceeding 320 MPa of various materials jaw crusher purpose and scope 1 of the series crusher is mainly used in metallurgy, mining, chemical, cement, construction, refractory and ceramics and other industrial sectors for the secondary and tertiary crushing of various medium hard ore and rock with. 2, the series crusher is most suitable crushing compression strength not higher than 300MPa (MPa) in a variety of soft and hard ore, the largest block of the material to be broken is not greater than the technical parameters specified in the table. Jaw crusher working principle of the series crusher song moving extrusion type, its working principle is: motor-driven belt and pulley, through the eccentric shaft to move up and down movement of the jaw, when the movable jaw rise between toggle plate and moving jaw angle becomes larger, thus promoting the moving jaw plate close to the fixed jaw plate, simultaneously with the material being crushed or split pieces to achieve the purpose of crushing; when the movable jaw down, the angle between toggle plate and moving jaw smaller, movable jaw plate In action rod, spring, away from the fixed jaw plate, then the crushed material from the crushing chamber discharge port. With the motor continuously rotating and mobile jaw crusher for periodic motion crushing and waste material, to achieve mass production.