Fuel Heaters manufacturers _ _ Qingzhou Min Fan Wei Machinery

 Boiler fan in the design is based on maximum operating conditions to consider, there are a lot of time fans need to be adjusted according to actual conditions the fan in actual use, the traditional approach is to switch the throttle valve to adjust the way, this adjustment method increasing the throttle loss of air supply system, when there will be in the starting inrush current, and to adjust the system itself is staged, slow adjustment of fuel Heaters price, reduce the loss of ability is very limited, but the entire the system works in fluctuating; and through the installation of the inverter (device) on the boiler fan can solve these problems once and for all, make the system work flat and stable state, and to recover their investments through frequency energy. Use of the environment should be kept clean, the fan keep the surface clean, the outlet should not have debris. Regular elimination blower and dust inside the pipe debris. Fans are only allowed to operate under completely regular case files, while maintaining adequate fuel supply facility capacity Heaters wholesale, voltage stability, non-phase operation, the power supply line must be a dedicated line, the line should not be long-term temporary supply. Fan Fan found abnormal sound during operation, the motor severe fever, live shell, switch trip, you can not start and so on, should immediately stop checking. To ensure safety, do not allow for maintenance of the fan running. Commissioning should be carried out about five minutes after overhaul Fuel Heaters manufacturers, confirmed that no anomalies start running again. Depending on the environmental conditions from time to time to supplement or replace bearing grease (motor enclosed bearing in without replacing the grease service life), in order to ensure the fan during operation of good lubrication, refueling times less than 1000 hours / times, Closed bearings and motor bearings, refuel with ZL-3 lithium grease fill the bearing inner and outer rings of 2/3. Running short of oil is strictly prohibited. Fans should be stored in a dry environment, avoiding motor damp. Fans at open storage, measures should be rain. During storage and transport process should prevent the fan bump, so as not to damage the fan. Fuel Heaters manufacturers _ _ fan mechanical Qingzhou Wei Min Min by Qingzhou Wei Machinery Co., Ltd. Qingzhou Wei Min Machinery Co., Ltd. (www.qingzhouwenkong.com) (www.qingzhouwenkong.com) strong, credible, Shandong Weifang fan, ventilation equipment industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Qingzhou Wei Machinery people into the brilliant and you work for a better future!