ABB ACS310 drive

ABB ACS310 drive Features: ACS310 is ABB low voltage AC and an outstanding standard transmission products, for variable torque applications such as pumps and fan applications. Specially designed a series of pump and fan applications in favor of powerful features, including built-in PID controllers ... Product Details: Product Description ACS310 is ABB low voltage AC and an outstanding standard transmission products, for variable torque applications, such as pump and fan applications. Specially designed a series of pump and fan applications in favor of powerful features, including built-in PID controllers and PFC (pump and fan control), in order to respond to changes to optimize transmission performance pressure, flow or other external data. These features combined with preprogrammed application macros, an intuitive user interface and several secondary display, you can quickly achieve transmission installation, parameter setting and commissioning. Applications: booster pumps, submersible pumps, irrigation pumps, blowers, fans back. Highlights: pump and fan characteristics; unified height and depth; efficiency calculator; depending on the application, select Advanced Control Panel or Basic Control Panel; built-in Modbus RS-485 fieldbus interfaces; for fast parameter setting FlashDrop tool. Applications booster pumps, submersible pumps, irrigation pumps, blowers, fans back to the selection range of three-phase 200-240V, 0.37-11KW three-phase 380-480V, 0.37-22KW Caution 1, must ensure that no drilling during installation dust from entering the drive. 2, if the drive is connected to multiple motors, you must use thermal relay or circuit breaker for overload protection, these devices may require a separate fuse to cut off the short-circuit current. If the motor cable according to the nominal current of the drive, then the drive can motor cable and the motor short circuit protection. 3, the wiring process: If the ungrounded IT shop system or a high-impedance grounding shop EMS filter used in the system, then the system may filter capacitor to ground the inverter by EMS, then this may cause damage to the inverter ;