Professional production and sales GNQ-30

 GNQ-30 high-energy ignition devices, mainly used in power station boilers, petrochemical and other industries large light oil, low calorific value gas, heavy industrial burner automatic ignition with ignition reliability, long life and other advantages, high temperature combustion side, anti-coking, with self-cleaning capacity. ? Model? Brand volume applicable fuel use? GNQ-30? Light oil, heavy oil, low calorific value gas Memec Thermal? 400 × 225 × 125mm main power station boilers, petrochemical and other industries large light oil for low calorific gas, heavy oil industry Automatic burner ignition with ignition reliability, long life and other advantages, high temperature combustion side, anti-coking, with self-purification capacity. First, the technical parameters: ???? 1, power supply voltage: 220V ± 10% 50 / 60HZ 2, adapt Fuel: light oil, heavy oil, low calorific value gas 3, the lighting rod temperature: 1300 ℃ 4, the ignition frequency: 6 12 / S 5, spark energy: 30J Second, the ignition box size; ??? length × width × height = 400 × 225 × 125mm Third, the lighting rod and ignition cable; ???? 1, the front end of the ignition rod material 2520 superalloys; semicond 2 high-temperature materials, diameter Φ16.5, mounting thread M18 × 1.5, the length of on-demand supply. Dedicated high energy ignition cable cable length of the supply according to user requirements, but the maximum length should not exceed 80 m. Fourth, the installation and wiring; ???? 1, opened the burner Φ16.5 and processed into mounting screw hole M18 × 1.5 and the lighting rod screwed into the can, the lighting rod end mounted on the fuel injection combustion (gas) 30 ~ 50mm at the front of the mouth. The bar is a new type of structure ignition ignition rod, no adjustment discharge distance. 2, the series ignition device by the cabinet, a dedicated high-energy ignition cable and rod composed of three parts. When installing the ignition box and the lighting rod with a special energy cable connection. Power line 220V.AC. Fifth, use; ????? 1, when the ignition, you should open the ignition, then fuel injection (gas) ignition; ignition timing is generally not more than 30 seconds. 2, ignition, combustion air should be off a small, gradually increasing the combustion air after the fire and so on. 3, the fuel should be good atomization, the atomization of poor quality affect the success rate of ignition. 4, the ignition device is 30 seconds, and then should rest for two minutes and avoid continuous long-term use. ?