4SP, 6SP stainless steel deep well pump

4SP, 6SP stainless steel deep well pump Product Category: Diameter: Φ100-Φ35 (mm) Flow: 2-320m3 / h Head: 20-350m Applications: Clean water and media similar to water in a product introduction, 4SP, 6SP stainless steel deep well submersible pumps Product Overview 4SP, 6SP stainless steel deep well submersible pump is one of the direct-coupled pump wells with submersible pumps, run directly dive into the water. Elongated structure. Single-stage or multi-stage charge pump type water submersible pump wet phase asynchronous motors. It is designed for agricultural irrigation, sprinkler irrigation, industrial and civil construction of drainage system developed for ponds, fish ponds, water towers, deep well water and bottled water towers, fountains. Two, 4SP, 6SP stainless steel deep well submersible pump product range of applications suitable for the extraction of groundwater, reservoirs, canals, rivers, mines and so on. Water projects, mainly used for domestic water mountain plateau, irrigation, also for urban, industrial, railway, mining, water supply and drainage construction site use. Three, 4SP, 6SP stainless steel deep well submersible pumps Product Features 1, motor, pump body, dive into the water running, simple structure, energy efficient, safe and reliable. 2, attractive appearance, light weight, low noise, pollution, environmental adaptability placed substantial project cost savings, does not affect the architectural and natural landscape. 3, installation, use, maintenance is simple and convenient, small footprint. Four, 4SP, 6SP stainless steel deep well submersible pumps Conditions of Use: 1, the power of 50Hz, 380V three-phase AC or (single phase 220V). 2, the pump is fully immersed in running water, dive depth of not less than 0.5m, not more than 5m. 3, ambient water temperature should be no higher than 40 degrees Celsius. 4, water is non-corrosive water, sand content of not more than 0.1%, PH value of 6.5 to 8.5. Vertical installation, wellbore integrity, dislocation five tube wells, 4SP, 6SP stainless steel deep well submersible pump Model significance: 4SP824-4 4 - 4 inch caliper namely (100mm) SP - whole stainless steel submersible borehole pumps 8 - Flow (m3 / h ) 24 - The pump series (m) 4 - rated power (kw) six, 4SP, 6SP stainless steel deep well submersible pumps Model Specifications No. Model Specification Power KW with a mouth diameter mm Flow m3 / h Head m single-phase (RMB) 220V -240V three-phase (yuan) 380V-415V 2 4SP206-0.37 0.37 32 2 22 have - 1 4SP209-0.37 0.37 32 2 34 there - 2 4SP213-0.55 0.55 32 2 49 there - 3 4SP218-0.75 0.75 32 2 69 Yes Yes 4 4SP223-1.1 1.1 32 2 89 Yes Yes 5 4SP228-1.5 1.5 32 2 107 Yes Yes 6 4SP233-1.5 1.5 32 2 132 Yes Yes 7 4SP240-2.2 2.2 32 2 148 Yes Yes 8 4SP248-2.2 2.2 32 2 186 Yes Yes 9 4SP255-3 3 32 2 212 - there are 10 4SP265-3.7 3.7 32 2 257 - there are 11 4SP275-4 4 32 2 296 - there are 12 4SP306-0.37 0.37 32 3 24 there - 13 4SP309-0.55 0.55 32 3 36 Yes - 14 4SP312-0.75 0.75 32 3 48 Yes Yes 15 4SP315-1.1 1.1 32 3 61 Yes Yes 16 4SP318-1.1 1.1 32 3 72 Yes Yes 17 4SP322-1.5 1.5 32 3 91 Yes Yes 18 4SP325-1.5 1.5 32 3 100 Yes Yes 19 4SP332-2.2 2.2 32 3 128 Yes Yes 20 4SP339-3 3 32 3 156 - there are 21 4SP344-3 3 32 3 181 - there are 22 4SP352-3.7 3.7 32 3 215 - there are 23 4SP360-4 4 32 3 246 - have 24 4SP504-0.37 0.37 32 5 14 there - 25 4SP506-0.55 0.55 32 5 21 there - 26 4SP508-0.75 0.75 32 5 29 Yes Yes 27 4SP512-1.1 1.1 32 5 44 Yes Yes 28 4SP517-1.5 1.5 32 5 60 Yes Yes 29 4SP522-2.2 2.2 32 5 81 Yes Yes 30 4SP525-2.2 2.2 32 5 90 Yes Yes 31 4SP5229-3 3 32 5 104 - there are 32 4SP533-3 3 32 5 119 - there are 33 4SP540-3.7 3.7 32 5 151 - have 34 4SP544-4 4 32 5 160 - there are 35 4SP805-0.75 0.75 32/40 8 18 Yes Yes 36 4SP807-1.1 1.1 32/40 8 27 Yes Yes 37 4SP810-1.5 1.5 32/40 8 37 Yes Yes 38 4SP812-2.2 2.2 32/40 846 Yes Yes 39 4SP814-2.2 2.2 32/40 8 54 Yes Yes 40 4SP818-3 3 32/40 8 69 - there are 41 4SP821-3.7 3.7 32/40 8 80 - there are 42 4SP824-4 4 32 / 40892-- have 43 4SP825-5.5 5.5 32/40 8 95 - there are 44 4SP830-7.5 7.5 32/40 8 114 - there are 45 6SP1706-4 4 75/100 17 45 - There are 46 6SP1708-5.5 5.5 75/100 1760-- have 47 6SP1712-7.5 7.5 75/100 17 90 - There are 48 6SP1715-9.2 9.2 75/100 17 113 - there are 49 6SP1718-11 11 75/100 17 135 - there are 50 6SP1721-13 13 75/100 17 158 - There are 51 6SP1724-15 15 75/100 17 180 - there are 52 6SP1730-18.5 18.5 75/100 17 225 - there are 53 6SP3003-3 3 75/100 30 22 - There are 54 6SP3005-5.5 5.5 75/100 30 36 - have 55 6SP3007-7.5 7.5 75/100 30 50 - There are 56 6SP3009-9.2 9.2 75/100 30 65 - There are 57 6SP3012-11 11 75/100 30 87 - There are 58 6SP3014-13 13 75/100 30 101 - there are 59 6SP3016 -1515 75/100 30115-- have 60 6SP3019-18.5 18.5 75/100 30 137 - there are 61 6SP3023-22 22 75/100 30 166 - there are 62 6SP4603-5.5 5.5 75/100 46 26 - There are 63 6SP4605-7.5 7.5 75/100 4643-- have 64 6SP4606-9.2 9.2 75/100 46 51 - There are 65 6SP4607-11 11 75/100 46 60 - There are 66 6SP4608-13 13 75/100 46 68 - There are 67 6SP4610-15 15 75 / 1004685-- have 68 6SP4612-18.5 18.5 75/100 46 102 - there are 69 6SP4614-22 22 75/100 46 119 - there are 70 6SP6003-5.5 5.5 75/100 60 22 - There are 71 6SP6004-7.5 7.5 75/100 6030-- have 72 6SP6005-9.2 9.2 75/100 60 37 - There are 73 6SP6006-11 11 75/100 60 45 - There are 74 6SP6007-13 13 75/100 60 53 - There are 75 6SP6008-15 15 75/100 60 60 - There are 76 6SP6010-18.5 18.5 75/100 60 75 - There are 77 6SP6012-22 22 75/100 60 90 - Yes Note: This product casing, impeller and diversion shell etc. made of stainless steel, external single match start device, an additional increase. If in doubt please contact us seven, 4SP, 6SP stainless steel deep well submersible pumps running failure and troubleshooting: no water or effluent variable: 1, moving the water level below the pump intake - increases pipes, if not the water and over pump range is recommended for use lift pump. 2, severe water pipes, or pipes disconnected - replace pipes or pipes installed separately. 3, rotor and shaft loose - replace the rotor. 4, part of the impeller loose - Reassemble impeller. 5, motor reversal - swap power connector. 6, pipe blockage - clear the blocking material. Pump flow is reduced: 1, the sealing ring severe wear - replace the sealing ring. 2, water treatment network diversion shell impeller is blocked - remove the blocking material. 3, voltage, frequency, low - shut down for the voltage reaches a predetermined value after the start. 4, moving the water level dropped more than pump rated head - Replace high-lift pump. Unit severe vibration or excessive current meter pointer swings: 1, shaft or motor shaft bending - Repair or replace the pump shaft or motor shaft. 2, wear between the motor shaft and the bearing shaft is too large - Replace the bearings. 3, the thrust bearing wear or damage - replace the thrust bearing. 4, the thrust plate fastening nut damaged - Shanghao nuts or repaired spindle head. 5, the thrust plate rupture - replace good thrust plate. 6, rotor sweep chamber - to find out why for repairs. 7, the impeller rotor imbalance or broken rotor bar - good balancing, replace the rotor. 8, bolts loose - Shang Hao bolts. 9, low lift and large flow pump motor overload - plus valve to control the flow running operating point. 10, intermittent water pump enough water inflow - plus valve controls the amount of water. The motor can not start and a buzzing sound: 1, phase (line or starting equipment) - repair lines or boot device. 2, the voltage is too low - adjust the voltage. 3, bearing clinging - Fixed good bearing. 4, rust between the impeller and seals - leveraging the pump rotation or removing the pump reload time. 5, a foreign body in the pump impeller can not be transferred Case - remove the object. Insulation resistance is too low winding burned: 1, the joint water - repaired joint. 2, winding damage - wrapped or replace winding. 3, cable rupture - wrapped cable. 4, the motor water - filled with water to ensure the motor. 5, phase operation - Check the good lines and equipment to ensure the normal operation. 6, long overload dynamic change - to reduce the load so that the motor current does not exceed the nameplate rating. 7, buried in mud motors - pumps installed by the installation requirements.