Bus shelters | Kim of the bus station manufacturers | shelters manufacturers | stainless steel antique bus

Technical parameters First, the headliner:? 1, supporting the bow using 3.0mm thick carbon steel plate, phosphate, outdoor surface spray powder processing. 2, the top of a 5 + 5 natural green laminated glass (glass arc). 3, located at the top front of the modified strip. Second, the column: 1, column uses 3.0mm thick 160mm × 160mm steel square column, hot-dip zinc, outdoor surface spray powder processing. 2, column foot with adjustable floor activities for correcting parallel. 3, stainless steel bolt connection used between the column and the light box, the top supporting bow. Third, the cabinet: 1, Box with 1.5mm thick carbon steel plate, crosspiece support, phosphate, outdoor surface spray powder processing. 2, the cabinet features 40W lamp; 21 / large boxes, 5 / small boxes. 3, drag a box equipped with two 40W ballasts; 11 / large light box, 3 / small light box. 4, tube frame with 1.5mm thick carbon steel plate, phosphate, outdoor surface spray powder processing. 5, each station an additional GFCI West Germany, Europe grams timed switch assembly set. Fourth, the Frame: 1, frame with 1.5mm thick carbon steel plate, phosphate, outdoor surface spray powder processing. 2, transparent plate with 8.0mm thick transparent glass. 3, the transparent plate and frame combination with the use of K-type 3 × 10 waterproof, dustproof cushion gum, swage with a zinc plate. 4, transparent panel set up gradient lace. 5, the inner periphery of the frame set Raab devices. Fifth, the cabinet and the frame of cooperation: 1, box and frame with hinged joint. 2, the outer frame of the cabinet with the addition of P-type 5 × 10 waterproof, dustproof sealing tape. 3, hydraulic steam when opening frame stays fixed, fixed with anti-theft luggage lock when closed. Six seat stool: 1, seat stool with 1.5mm and 2.0mm steel sheet metal made after phosphating spray outdoor powder processing. Seven, the foundation concrete bus shelters and watering ratio: 1, concrete ratio: 1: 3: 4. 2, twice poured concrete.