Superior SZ series water ring vacuum pumps specializing in the production of quality models and pump prices

SZ-type water ring vacuum pump uses and specifications: SZ water ring vacuum pumps and compressors are used to suction or compressed air and other non-corrosive gases do not dissolve in water to form a vacuum and pressure in a closed container. SZ water ring vacuum pumps have SZ-1, SZ-2, SZ-3 maximum vacuum and SZ-4 four specifications, the pump were formed between 86 to 95%. SZ-1 and SZ-2 maximum pressure that can be formed is 1.0 to 1.4 kg / cm 2, SZ-3 and SZ-4 with the maximum pressure allowable under motor power of 1.5 kg / cm 2, if the increase in motor power The maximum pressure of 2.1 kg / cm 2 (pump type meaning: as SZ-1, S- water ring, Z- vacuum pumps, 1 pump serial number) Caution SZ water ring vacuum pump due to work, the water will heat while part of the water will be drained and the gas together, therefore SZ water ring vacuum pump at work, the pump must continue to supply cold water and add to the cooling water pump consumption. Supply of cold water is appropriate to 15 ℃. When SZ water ring vacuum pump when the exhaust gases are discharged at one end part of an exhaust gas tanks, gas and brought the water into the tank, the gas from the tank of the pipe and then run away, and the water fall into the tank bottom through the return pipe back to the pump use, if the cycle will heat a long time, then the need to supply some cold water from the water tank at