Wholesale manufacturers of stainless steel fume hood PP fume hood laboratory fume hoods fume hoods corrosion

Fume Hood Product specifications: 1200/1500/1800 * 850 * 2350mm (L * W * H) Product Description: 1. Table: 12.7mm board is psychological, close the water around the edge, so it has chemical resistance (MDR 149 kinds of acid reagent), high temperature, water, anti-bacterial, anti-radiant heat, easy cleaning and maintenance, scratch wear, impact resistance and other characteristics, are more than 600 colleges and universities nationwide widely used. 2. Housing: 1.0mm cold rolled steel in CNC machining centers, cutting, positioning drilling, bending welding forming, acid phosphate treatment after baking temperature curing epoxy powder coating. High adhesion, surface hardness strong corrosion resistance, aesthetic appearance. 3. lining and baffle plate: E1 grade environment-friendly double-sided melamine MDF, thickness of 18mm, the peripheral edge water treatment using 2mmPVC four weeks. Deflector mounting position and angle for an exhaust gas distribution, no dead ends, to ensure that the proportion of different gases can effectively discharge. 3. Window: using three 5mm safety glass, can move around, and using stepless balancing device, can move up and down freely adjusted. 5. Fluorescent Description: fluorescent hidden in the panel, not in contact with the fume hood airflow, easy to replace. Using a 30W fluorescent lamp, and a 5mm tempered glass. 6. Configure: Using PP collection hood; distribution box in line with 220V and 380V power requirements, and electrical leakage protection device; 12V touch-control switch, centralized control of the entire circuit system, the control panel is automatically set electric shock protection air switch, fan switch , light switches. 7. Accessories: matt stainless steel handles; laboratory dedicated power outlet; diameter φ10mm injection adjustment feet, shock, moisture, corrosion resistance, can be adjusted according to the cabinet interior floor height, maximum adjustment of 0-30mm. 8. craft: All steel welded after epoxy powder spray chart, visually smooth and no pads. All water, electricity, gas requires a secure, applicable, and hidden installation. After the cabinet backplate provided service hole. Three baffles space at different heights so harmful gases are discharged from different segments area. Fume hood face velocity to the speed of operation of 0.5m / s in the hood of the air, to ensure that no residual gas is present. High blowing efficiency, exhaust volume of about 1600m3 / h, and noise. 9. Special sizes can be made according to customer demand.