800kg double curtain Samsung Allende fire door motor

I. Overview FJJ fire series of electric rolling door machine of our company's products. The advantages of learning from a variety of advanced models at home and abroad on the basis of the latest research and development of electric shutter doors, the product quality and reliable, full-featured, easy to install, is the ideal accessory products of modern architecture, the product can be used for left and right two Installation form. Second, the working environment and working conditions: ☆ ambient air temperature changes with the seasons. ☆ relative humidity of 90% (25 ℃). ☆ short-term work system, continuous operation shall not exceed 10 minutes. Third, the product features: ☆ delicate beautiful shape, compact structure, strong power; ☆ imported electrical components, security and stability; ☆ low noise, vibration small, low power consumption, light weight; ☆ easy installation, long life and reliability; ☆ easy manual operation during a power outage. Fourth, the installation: ☆ Press the right product unified installation method for manufacturing (see from the house to the door), if the left brake housing shall be installed four locking screws loosen, namely rotating the hand re-lock fastener housing by 180 ° , limit switch line white (on) black (under) need swap. ☆ sprocket holder plate according to the specific need to refer to Figure 3 mounted horizontally or in the range of 0-45 ° choose mounting. When the sprocket holder plate is not mounted horizontally, the brake housing should be rotated so that endless hand chain vertically down naturally, paying particular attention to the mating housing and motor cover junction, make sure that no gap after the four screws (diagonal evenly) tightened to avoid excessive force and tighten the casing cracks, affect the braking effect of the brake. ☆ rolling door machine should be installed horizontally, curtain reel should be concentric, horizontal slats without delay card phenomenon. ☆ adjust chain sag is 6-10mm (not hang curtains in front of the shaft adjustment). ☆ Door Motor external power supply line section is not less than 1mm2. ☆ special emphasis on anti-damp, rain, avoid electric rolling door motor electrical short circuit, leading to rolling door motor burned out. ☆ three-phase power supply phase sequence rolling door machine can not be reversed, when the change should rise immediately fall down, adjusted the phase sequence, before normal use. Otherwise it will lead to loss of control shutter hoisting serious damage to the curtain. ☆ rolling door machine must be grounded to prevent electric shock; grounding screw mounted on the sprocket bracket plate.