Tetrafluoroethylene stick

Tetrafluoroethylene rods made from 100% pure PTFE by molding, turning, cutting and other refining process, in known plastics it has the best resistance to chemical corrosion, aging, electrical insulation, and has a very low coefficient of friction, in the absence of load, it can be used at a temperature of -180 to + 260 degrees. Lubricating material piston rings, rails, etc.:: Application: flat pad, V-pads, lining material and other sealing materials electrically insulating material: anti-sticking materials. Tetrafluoroethylene rods in three sizes: tetrafluoroethylene push rod. Tetrafluoroethylene rod extrusion, molding tetrafluoroethylene rod diameter 4mm ~ 9mm rod diameter selection of dispersion polymerization PTFE resin processed into paste push rod diameter 10mm ~ 50mm optional suspension PTFE resin by ram extrusion processed and 55mm ~ 300mm diameter rods made of an embossed tetrafluoroethylene stick Features: high temperature - Use working temperature of 250 ℃. Low temperature - with good mechanical toughness; even if the temperature drops to -196 ℃, but also to maintain a 5% elongation. Corrosion - for most chemicals and solvents, showing an inert, resistant to acid and alkali, water and various organic solvents. Weatherability - the best plastic aging life. High lubrication - is a solid material in the lowest coefficient of friction. Not adhere to - is a solid material in the minimum surface tension, does not adhere to any substance. Non-toxic - with physical inertia, as a long-term implantation of artificial blood vessels and organs of the body without adverse reaction. Tetrafluoroethylene rods are widely used seal / gasket, ring material, the wear plate / seat electric, insulation parts, corrosion resistance industry, machinery parts, lining, oil and gas, petrochemical, chemical industry, equipment manufacturers and so on. Bar: Diameter: 6 ~ 200mm.x 200mm / 1000mm.