Pulse controller processing | Guangzhou pulse controller | Rui Yuan Electrical

Sixth, the use of 1, the operation control (only supports QYM-ZC-10D, QYM-LC-10D): 2, when the circuit board "Select signal" inset connection, external run signal input is invalid; 3, when the board On the "Select signal" inset disconnected, external run signal input. Connected to the power supply, external contact is not closed, the controller is stopped, waiting for an external contact closure; external contact closure after the pulse control device works, the controller starts from the first road start of output drive pulse valve, by pulse width delay, stop the output, and then by the pulse interval delay, continue to output all the way down, all the way to the last post, and then by the beginning of the next cycle interval delay of one cycle from the first path; 4, digital display: control device in operation, the pulse width, pulse interval or cycle the remaining time interval; when you stop running, display "----"; parameter settings, display the current setting value of the parameter. 5, the maximum outputs: large ones setting the maximum controller by setting the "Number of outputs" parameter. 6, the parameter settings: Press "Function" button pulse control device, so that the indicator parameter entries to be set lights pulse control device installation, turn the "Settings" knob to adjust the parameter value; After the setup is complete, press " Function "button to Parameter indicator to" run "where indicated, parameters are automatically saved and the control device in accordance with the parameter value is set to start automatically control operation. Third, technical indicators: outputs: 1--18 + 1 channel optional; control parameter set at any time, set the parameters after power is not lost; support remote start / stop control (optional); Input voltage: AC 50HZ 180-240V; each output voltage: DC 24V; output current per channel: DC 1A; enables online (lifting + pulse), offline (pulse) control; support cinder control; Dimensions: 248 × 188 × 100mm; Fourth, the parameter setting range: Handle pulse interval: Set the range of 05 ~ 99 seconds, the system default is 5 seconds; pulse width: setting range is 0.02 to 0.99 seconds, the system defaults to 0.01 seconds; valve interval: Set the range of 003 to 999 seconds, the system defaults to 003 seconds; periodic interval: Set the range of 001 to 999 seconds, the system defaults to 100 seconds; cinder long time: The setting range is from 0 to 99 seconds, the system defaults to 05 seconds; cinder Interval: setting range is from 0 to 99 seconds, the system defaults to 50 seconds; poppet number: the number of cells pulse controller design, setting range is from 0 to 10, the system defaults to 00; setting free the poppet valve 0; pulse valve number: setting range is 01 to 18, the system defaults to 08; energy-saving long time: The setting range is from 0 to 99 seconds, the system defaults to 0 (ie no power saving); septal: Range to 01-99 seconds, the system defaults to 05; impulse control instrument processing | Guangzhou pulse controller | Rui Yuan Electrical provided by Xinxiang City, Rui Yuan Electrical Equipment Co., Xinxiang City, Rui Yuan Electrical Equipment Co., Ltd. (www.xxryjd.com) (www.xxryjd.cn) strong, credible, Henan Xinxiang control (regulation) instrumentation and other industries has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Rui Yuan Electrical and you hand into the brilliant, for a better future!