sbs self-adhesive membrane _ _ Lu Yang waterproof self-adhesive membrane material

Without adhesive, nor be heated grill until melted, just tear the isolation layer can be firmly bonded to the substrate. To facilitate the construction and construction fast. 2, flexibility, elongation having a rubber excellent, well adapted to the deformation and cracking the grassroots level. 3, has excellent adhesion to the grass roots, often greater than the shear adhesion force (adhesive surface outside the fracture), ensure tight lap reliable and seamless. 4, very unique "self-healing" self-adhesive membrane, can heal on their own small puncture damage, in the event of a puncture or hard objects embedded automatically with these objects as one, to maintain good water resistance. Suitable for industrial and civil roofing, basement, swimming pools, reservoirs, municipal engineering and underground tunnel waterproofing, but also for the wooden structure and metal structure of the roof waterproofing. Especially suitable for inappropriate use of fire to the oil depot, chemical plants, textile mills, grain storage and other water projects. With different surface materials are divided into three types: PE (polyethylene surface) applicable to non-exposed waterproofing; AL (aluminum foil surface) suitable for exposed waterproofing; N (no film, namely the double-sided adhesive) is applied to the auxiliary water works; and waterproofing compound used; by using the function is divided into exposed waterproofing (O) and non-exposed waterproofing. Specifications, area: 20m2,10m2,5m2 width 920mm, 1000mm thickness 1.2mm, 1.5mm, 2.0mm. Construction application 1, the primary requirements: waterproof layer should be solid formation, without hollowing, loose, sand, peel self-adhesive membrane plant, no dust, debris, grease, rust, etc. bac self-adhesive membrane, the moisture content It should be less than 9%. 2, node processing: special parts eaves, gutters, wall, fall-mouth, deformation joint with an additional layer of self-adhesive membrane to do. 3, airbrushed or sprayed special primary treatment agent until after the primary treatment agent is dried, then Stones roll. 4, lap width: long and short side lap width of 80mm. 5, the horizontal Stones: first with ink lines pop up a baseline at the grassroots level, and then from low to high Stones, while the volume of sbs expand self-adhesive membrane, opened the isolation of paper, paving along the baseline, immediately after paving rubber roll [reality. 6, vertical Stones: Stones from the vertical to the high-low side kick side to expand the release paper, after paving the rubber roller compaction. 7, coil endcaps: close the first place with a sealant, and then fixed with metal beads, fixing screws and the top seam to seal. sbs self-adhesive membrane _ _ Lu Yang waterproof self-adhesive membrane material provided by the Weifang City, Shandong foreign waterproof material Limited. Weifang City, Shandong foreign waterproof material Ltd. (www.luyangfs.com) (www.luyangfs.com) strong, credible, Shandong Weifang waterproof, moisture-proof materials industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Lu Yang waterproof material into the brilliant and you work for a better future!