Ultra-high temperature lithium grease grease Calcium grease

How to use grease? (1) The amount of lubricating grease filling should be appropriate excessive, will increase the friction torque, temperature, increasing the amount of fat consumption; and increase the amount of fat is too small, you can not get reliable lubrication and dry friction occurs . In general, the appropriate amount of bearing grease within the overall void volume of 1/3 ~ 1/2. However, according to a situation, sometimes it should edge greased bearing lubrication effect the cavity. (2) pay attention to prevent different types, grades and old grease mix to avoid cross-use mounting grease containers and tools. Otherwise, it will produce lipid droplets point depressants, cone penetration increases and the mechanical stability decline adverse effects. (3) to be replaced with new fat job due greases variety and quality are constantly improve and change, old device to use the new grease should be after trial after trial before the official use; in the fat replacement, should be Clear waste grease, clean the parts. When supplemented with grease, waste greases should be extruded up during the fat mouth to see new grease. (4) The importance of management in the process of lubrication and greasing before collection, to pay strict attention to the clean containers and tools for the grease fitting on the device should be wiped clean prior prevent mechanical impurities, dust and sand mixed. (5) Note that season with fat as the timely replacement of equipment of their environment and the winter and summer Lee larger temperature changes, if summer or winter, with a fat contrary, the result will be counterproductive. (6) Note that change regularly add grease grease should be applied for time depending on usage, it is necessary to ensure reliable lubrication and not cause waste grease. (7) Do not use a wooden or paper containers to prevent the loss of oil hardened grease, mixed with water or contaminated deterioration, and should be stored in a cool dry place. END grease spills to be cleared and cleaned.