Cargo lifter spot sales | Qinghai rail cargo lifter | factory dedicated rail freight

 How to effectively reduce the degree of wear and tear have to use the lift alone wear, elevator as a common tool for high-altitude operations, often conducted with the use of repeated use, so wear and tear is normal, but to control the degree of wear, too wear will shorten lifts life, how to reduce the wear and tear it? a, pin, bearings and other moving parts, even grinding oil. Do not overload the use of rail cargo lifter lifts the drawings, it will exacerbate wear. with parking and transit cargo lift station parking spot sales , should develop a habit of sliding safety. Second, when driving in road maintenance and construction sites, use low-amble options by road to avoid hitting the tire being excessive, even stabbed or scratched. turn should be based on a curve road, turning radius, the general reduction should be appropriate to avoid due to the inertia force and the centrifugal force, unilateral accelerated tire wear. Third, the lack of oil should be promptly filling the tank of hydraulic oil, so as not to rise less than the rated highly increased wear. downhill slope should be based on The size of the length and road conditions, proper control of the speed, so little use of the emergency brake to avoid, reduce tire wear. Fourth, do too much at the start, so as to avoid dragging the tires and accelerated tread wear. Jinan 3 lifts work -5 hours later, try to rest for 5-10 minutes, so as to avoid motor overheating, increased wear. We use the elevator during attention to reducing wear and tear, can improve the efficiency of equipment to strengthen all parts of the operating mechanism, extend the life of the equipment. For l Safety regulations of a car lifting platform, lifting car lifting platform to support stable, landing slowly. Second, when someone lifts lifting platform lifting operation is prohibited. Third, the discovery mechanism is not working, the motor is not synchronized, the carrier part is uneven or hydraulic leak, and Times repair should not be sick operation. Fourth, the work is completed, should be cleared of debris, clean the lift to keep the site clean and tidy surroundings. Five regular basis (six months) to exclude the lift cylinder water, and check oil, fuel shortage should be filling the same brand of pressurized oil. Car Lift six, should be removed before using the appliance and debris near the lift hinder job, and check the operating handle is normal. Seven, sensitive and effective operating mechanism, the hydraulic system does not allow creeping phenomenon. Eight branch rail cargo lift car manufacturers, four branch angle should be in the same plane, the height adjustment support pads into contact angle of the vehicle chassis support site. Nine, support the car, the vehicle can not support too high, after support from the four brackets to be locked. X. After lifting vehicular traffic shall adjust the movement of the lift support block being the model specified lift point. XI should leave the vehicle when lifting rail cargo lifter, give rise to require a high degree, you must insert the safety lock pin, and ensure safe and reliable vehicle before starting the job. Cargo lifter spot sales | Qinghai rail cargo lifter | factory dedicated rail freight provided by Jinan spring peak Machinery Manufacturing Company Limited. Jinan spring peak Machinery Manufacturing Co., Ltd. (www.591sjj.com) strong, credible, in Jinan, Shandong hydraulic machinery and components industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Quanfeng lift into the brilliant and you work for a better future!