Vibration motor selection | vibration motor | Ka billion vibration motor

When we press the button on the bell of the circuit that is turned on, then the current from the joint A, after two solenoid coil and pressed against the contact spring piece on 2 point 4, through to fitting B, the current through the coil beginning coil spring that is attracting sheet 2, while the small Chung 3 will knock on the bell, but then the spring plate 2 has left the contact point 4, the circuit immediately interrupted and a magnetic coil that is driven vibration motor selection, so spring sheet and little Chung That is restored to its original position, that is, in contact with the contact point 4 vibration motor manufacturer, and therefore the circuit is turned on again. Such repeated until we relax a button up. If we want to use a rectifier (ie only allow current in one direction through a device) vibration motor YZS, it must be required when the current from the back through the circuit no current time, that is to say, to change the direction of current to alternating current This frequency is formed automatically interrupted. It indicates current size of the two values: voltage and current strength. Case of the current flow and liquid flow in the duct is similar. Vibration motor selection | vibration motor | Ka billion provided by the Xinxiang vibration motor vibration motor Equipment Co., Ltd. Ka billion. Xinxiang vibration motor Equipment Co., Ltd. Ka billion (www.xxjydj.com/) strong, credible, in Xinxiang of asynchronous motor industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Jiayi vibration motor into the brilliant and you work for a better future!