Beam smoke fire detector infrared beam on the radio 100 meters JTY-HF-C33

JTY-HF-C33-type beam smoke fire detector (hereinafter referred to as detectors) by the transmitter and receiver, the use is not affected by the smoke color infrared dimming mode. Single-chip computer, through the detector built-in CPU curing operation program, the probe has a strong analytical, judgment can be done automatically determine the external environment changes in compensation and fire / fault and through sound, light signal output means to give status indication. Especially suitable for unobstructed space, high-rise buildings, such as the various shopping malls, halls of the museum, ancient buildings, mezzanine large workshops, warehouses, tunnels, and various buildings, stuffy roof, etc., all in the form of smoke appear before the fire The place can use this product. When smoke enters the detection zone, since the beam is blocked so that the intensity of the infrared light received is reduced. When the smoke concentration reaches a certain intensity of the infrared light is below the set threshold, the detector to report a fire, start the buzzer, the red LED lights. Second, the characteristics ?? built-in laser sight, commissioning accurate, simple and convenient. ?? All of the devices within the detector wires are connected straight welding, without any connectors, to prevent the influence of temperature / humidity changes brought about to ensure long term reliable operation at high altitude detector; ?? hermetic housing, with dust waterproof ; ?? can install wide-angle, better adapted to non-parallel, curved, sloping walls, etc., the vault, the lifter and other buildings; ?? axial single pre-compressing debug nut, convenient and fastening debugging does not change when the angle is adjusted; ?? commissioning according to circumstances automatically correct the sensitivity of the detector to ensure consistency; ?? receivers with a red and yellow lights and sound instruction, project commissioning simple and reliable; ?? have light Automatic monitoring of compensation, there is a strong anti-Japanese optical interference; ?? have dust automatic monitoring compensation function; ?? a variety of output interfaces, with the manufacturers to facilitate alarm input module supporting;