Electrolytic copper indium zinc - silver, bismuth electrolysis experiment rectifier power supply

Electrolytic copper indium zinc - silver, bismuth electrolysis experiment ◆ input rectified mains AC voltage range, 220V ± 15% / 110V ± 15%, frequency 46HZ-63HZ. ◆ Output voltage: 10% - 100% adjustable output or fixed output (0V from the transfer needs, please contact us in advance customer service, can be customized) ◆ Output Current: 10% - 100% adjustable output or fixed output ◆ Power effect: <0.3% + 10mV ◆ Load effect: <0.1% + 10mV ◆ cycle and random drift: <0.1% (rms) ◆ Cooling: fan cooling ◆ protection: over voltage, over current, short circuit, the output can be shorted After releasing a short circuit can automatically resume work ◆ Insulation resistance: ≥50M 500V DC between input and ground, the input and output, the output and ground. ◆ Hold time: at full load ≥20MS (AC 230V input). ◆ Rise time: full load Typ 50MS. ◆ working environment temperature -10 ℃ to 50 ℃. ◆ Dimensions: 300 × 200 × 70 (mm) ◆ Dielectric Strength: Input and output 1.5KV, input and ground 1.5KV, can be contracted to a higher voltage, input and ground 500V. ◆ Single power supply ripple and noise (MVP-P) <1% of the output voltage, multiple power supply + 5V ripple <60MV, other output ripple <20MV-100MV. ◆ 100% of the power supply by aging, testing only qualified factory. ◆ Safety standards: According to GB4943, UL60950-1, EN60950-1 design ◆ EMC standards: According to GB9254, EN55022 CLASS A design installation pieces subject to fee: ★ can be equipped with two 0-5V, 0-10V analogue signal control ★ ★ voltage and current output voltage and current output 0 ~ 5V voltage signal readback ★ ★ can be installed 5V level switch can be installed ★ ★ ★ ★ remote voltage compensation function can be added the timing is output ★