Extension of concrete sealer (oil)

I. Description of product low viscosity of the resin products, through self-polymerization of Polymer will be low-intensity curing concrete floor into a dense, solid unit. This product is more permeable (generally can penetrate 1-3 mm), simple construction, water and oil, dust-proof effect is very good, but also more durable. Second, the application surface 1, from the ash, sand from the concrete floor, cement floor 2, 3 from the gray terrazzo floor, from the ashes of emery ground surface 4, from the gray cement floor leveling Third, the construction process 1, the base surface Requirements: (1) ensure that the ground is completely dry and free of oil pollution; if the surface paint, glue and other contaminants must be completely eradicate; (2) low intensity mud new construction of the concrete surface must be removed, methods are grinding, hard brush water wash; (3) before the official brushing concrete sealer, ground sand and dust must be clean, it is best to use a vacuum cleaner exhaust sand and dust; 2, construction (1) This product can be opened directly without stirring, without any additives; (2) the use of common long-haired roller in direct roller, roller sequentially when, to avoid holidays or regional recoating times; (3) according to the severity of the ground from the sand, you need to roll 2 -4 times, until the ground is completely darken the color until the (similar to a dry concrete floor with color irrigated wet after), with about 0.3-0.5 kg / m2; (4) the completion of 12 hours can be put into conservation work, completed ten about five days to achieve the best results. IV Notes 1, sand serious regional (generally dries fast) should be appropriate to increase the amount of material. 2. The product containing organic solvents, irritating odor, is flammable, attention to ventilation construction, forbidden contact with an open flame. 3, poor weather resistance, not recommended for outdoor venues. 4, the construction environment temperature: 0 ℃ -50 ℃.