TD-XF2 concrete floor dusting treatment agent (oil)

I. Description of product low viscosity of the resin products, through self-polymerization of Polymer will be low-intensity curing concrete floor into a dense, solid unit. This product is more permeable (generally can penetrate 1-3 mm), simple construction, water and oil, dust-proof effect is very good, but also more durable. Second, the application surface 1, from the ash, sand from the concrete floor, cement floor 2, from the gray terrazzo floor from the ash carborundum floor 3, from the gray cement floor leveling Third, the construction process 1, the base surface requirements: ( 1) ensure that the ground is completely dry and free of oil pollution; if the surface paint, glue and other contaminants must be completely eradicate; (2) low intensity mud new construction of the concrete surface must be removed, methods are grinding, hard water scrubbing brush etc. ; (3) Official brushing TD-XF2 concrete floor before treatment agent from the sand, ground sand and dust must be clean, it is best to use a vacuum cleaner exhaust sand and dust; 2, construction (1) This product can be opened directly without stirring without any additives; (2) the use of the long-haired roller ordinary direct roll when roll in sequence, to avoid holidays or regional recoating times; (3) according to the severity of the ground from the sand, we need to roll Tu 2-4 times, until the ground is completely darken color (similar to a dry concrete floor with color irrigated wet after) so far, with about 0.3-0.5 kg / m2; (4) the completion of the conservation of 12 hours can be put into normal use, completed fifteen days or so to achieve the best results. IV Notes 1, sand serious regional (generally dries fast) should be appropriate to increase the amount of material. 2. The product containing organic solvents, irritating odor, is flammable, attention to ventilation construction, forbidden contact with an open flame. 3, poor weather resistance, not recommended for outdoor venues. 4, the construction environment temperature: 0 ℃ -50 ℃. 5, color change on the ground is large, as shown: