Grouting material CGM-1 _ German New Asia (certified) _ Nanning grout

Templates can be based planning approaches grout and grout construction plans to determine CGM grouting material support template, template positioning elevation above the base of the equipment should look at least 50 mm, it is necessary to support the template tight, solid, prevent loose, leak. For stirring the grout grouting material prices, according to the amount of water aquatic referral share certificates, mixing water used in drinking water, the water temperature to 6-40 degrees is appropriate, it is possible to use mechanical or manual mixing. Use mechanical mixing non-shrink grout, mixing time is typically 1-2 minutes. Selection artificial mixing, should be added to two-thirds of the water, mixing for 2 minutes, and then participate in the remaining water, continue mixing until a uniform, standard consistency water volume is 13% --14%. Grouting material for construction use, when the level of the template and the interval between the base of the device should be controlled at one hundred millimeters from top to bottom, this is for the convenience of filling construction. After the equipment foundation grouting is completed, remove the section should be addressed before the final setting of the grout layer. Until the release of the grouting construction process, it should prevent oscillation and bump filling layer, so as not to damage the grout layer to be hard. Bulky equipment foundation grouting thickness greater than one thousand millimeters of mixing grouting data and participate in the same proportion by better than 0.5 mm of stone, but needs identified groutability experiments can not meet the needs of grout performed every watering the thickness of the layers, the optimum range of three hundred to five hundred millimeters, but in practice the construction, generally have higher forging thickness, because the bubbles travel is too long, even if the oscillation arrival time of order, the bubbles can not be completely discharged, so that it grouting materials will harden the outer structure made of Honeycomb. Non-shrink grout grout because touch bubble cause the appearance of roughness occurs, and the temperature difference between the impact of the construction technique. Before filling lubrication and touch not the unclean appearance resulting surface grouting materials are not lubricated, has also undergone a lot of bubbles; and construction workers inject slurry directly affect the quality of surface technology construction technology; grouting together also a bubble cut protection approach. Grouting material CGM-1 _ German New Asia (certified) _ Nanning grouting material provided by the German New Asia Construction Co.. German New Asia Construction Co. (www.godjc.com) (www.15838304411.com) is Zhengzhou, special building materials leader, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, the maximum to meet customer needs. New Asia in German leadership with the staff warmly welcome all inquiries negotiations to create the German New Asia a better future.