Straw feed particle machine equipment, mountain Xin Machinery preferred, Qinzhou straw feed particle machine

 In recent years, along with large-scale farmers to increase straw feed particle machine, such that the particles machine industry rapid development. When using particle machine, usually I debug, but some of the problems that need attention. Then the article below and we explain particle machine debugging problems that need attention. 1, we must first understand the feed particle machine performance and operation of the process. 2, before commissioning should check the functioning of the pellet mill each specific device. 3, understanding and granularity of the particles used machine die hole matches mill, feed particle size should be fine, but not too small, preferably coarse, medium and fine appropriate, recommend the ideal particle size distribution as follows: a, 3.35mm above the size ≤1%; b, 2.0mm above the size ≤5%; about c, 1.0mm above the particle size of about 20%; d, 0.5mm above the particle size of about about 30%; e, the following shall not be less than 0.25mm size 20 about f, 0.25mm above the particle size of about 24%;%. 4, prior to commissioning to check the steam piping system used whether particle machine with good features and hydrophobic decompression functions straw feed particle machine prices, to ensure that required dry granulation quenched saturated steam, and to ensure the valve After always 0.058-0.4MPA steam. Particle machine has disinfection, reducing disease. Particles during the pressing machine straw feed particle machine, after up to 70 ℃ -100 ℃ high temperature short time, can kill a part of parasite eggs and pathogenic microorganisms that significantly reduce livestock diseases. Practice proof straw feed particle machine equipment, livestock feed pellets diarrhea, stomatitis, and pica significantly reduced. It should be noted that the farmers in the processing of the particulate material, drying time to dry to prevent feed moldy straw feed grain machine equipment, mountain Xin Machinery preferred, Qinzhou straw feed particle machine provided by Nan Shan Xin Machinery Co., Ltd.. Nan Shan Xin Machinery Co., Ltd. (zzshanxin.com) (www.henankeliji.com) is a leader in Zhengzhou, industry-specific equipment, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer demand. Xin Machinery leadership in the mountains with the staff warmly welcome all inquiries negotiations to create the mountain Xin Machinery better future.