Dry mortar spraying machine, HTC environmental protection (certified), Shandong mortar spraying machine

1 after maintenance work, grouting hose, air hose, nozzle cleaning Check 2, 3 cleaning and inspection equipment, air compressor. Cut off the power supply, air supply and close the valves, check all parts. 4, the electrical part of the power off, check all parts. 5, remove the nails and rotor supercharger, reassembly after cleaning. 6, other processing problems found during the operation, cleaning and maintenance. Action 1, before starting the class, press hands several times oiling pump to transmission parts. 2, after the power is turned dry mortar spraying machine, the first electric main motor interior mortar spraying machine, check the rubber spiral rotation direction is consistent mortar spraying machine, if not, that is, to replace the power supply phase line (Each time you have to take power this check) 3, connect the delivery hose and nozzle, water was added to the hopper wall 5L mortar spraying machine, start the motor out of the water pump to wet the hopper, pump and delivery hose, the water is pumped out most after shutdown. 4, into the hopper into putty or spray paint to boot (air compressor should be started and open valve) 5, is strictly prohibited without material hopper, under anhydrous idle state. Dry mortar spraying machine, HTC environmental protection (certified), Shandong mortar spraying machine provided by the Xinxiang City Hongda energy saving equipment Limited. Xinxiang City Hongda energy saving equipment Limited (www.xxhdjnhb.com) Henan Xinxiang, mortar leaders, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. HTC environmental leadership with the staff warmly welcome all inquiries negotiations to create a better future for environmentally friendly Honda.