Specializing in the production of boiler blower / G6-51 boiler blower / model is complete / reasonable price

 G (Y) 6-51-1 centrifugal boiler feed (lead) Fan Fan Manufacturing Co., Ltd. Hebei Teng Hao use ☆ ☆ G6-51, Y6-51 boiler feed Fan, suitable for power plant 2 ~ 670t / h steam boiler system to send the wind, but also to meet the requirements of high-pressure fluidized bed furnace head performance parameters. Fans of the series can also be used for dust, mine ventilation and general ventilation systems. Blower for air transport, delivery lead flue gas fan or particles containing impurities. Containing impurities concentration is less than 200mg / m3 can be used for more than 4 years. Containing impurities such as large also be used, but life will be shortened. For Fans maximum operating temperature must not exceed 250 ℃. ☆ ☆ form blower, induced draft fan is usually made of single-suction. Machine No. №8D ~ 29.5D each machine No. 20 a total of 40 kinds of specifications. Each fan has a right or left, can be made of two types. From one end face of the motor, the impeller rotates clockwise dextral fan who called to "right" means, in turn, called L-blower to "left". Position of the fan outlet to outlet angle the cabinet said. Fan drive way D-type namely: cantilever structure, motor and fan are used to connect flexible coupling drive. Full product name, for example as follows: G6-51-1№18D right 90 ° Y6-51-1№18D left 0 °. Where, G, Y, respectively, boiler and boiler blower fan, pressure coefficient 6 to 10 times the maximum efficiency point of the whole, more than 51 revolutions, one of the first design, №18, said impeller diameter 1800mm, 90 ° for outlet angle.