Pressure transmitter works, swim grace (certified), pressure transmitter

Installation instructions 1, take the pressure pipe welding pressure transmitters, pressure pipe is best to take the cut-off valve. Stay out of the sensor corresponding to the connecting thread pressure transmitter price, time to prepare for the maintenance of the sensor can be easily removed. 2, the sensor is installed in the vibration, temperature fluctuation range of the smallest places. Suitable installation position can effectively prevent sweat immersion housing. If the sensor will be installed in harsh conditions when the pressure transmitter manufacturer, must be vertical (downward pressure connector) installations. Do not install it in excess of the prescribed temperature range environment. 3. Do not turn directly to the upper sensor fixed sensor diffused silicon pressure transmitter, tighten the link below the six-party with a wrench. Range: Gas: -0.1MPa ~ 0 ~ 100MPa; the minimum range: 0 ~ 500Pa (clean air) Liquid: -0.1MPa ~ 0 ~ 100MPa; the minimum range: 0 ~ 5KPa positive and negative pressure type: ± 1KPa (clean gas); ± 10KPa (liquid); maximum: -0.1 ~ 70MPa (custom) Pressure: 2 times the range (10MPa or less, more may contact) 1.5 times the range (10MPa or more, more may contact) pressure transmitter works swim En (certified), pressure transmitter provided by TU Technology Co., Ltd. Beijing tour. Beijing Tour En Ltd. (www.bjyouen.com) is the Beijing Haidian District, chemical instrumentation leader, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. Well the tour leader with the staff warmly welcome all inquiries negotiations to create a better future trips grace.