Technical drawings energetic ion exhaust treatment, waste gas treatment, the introduction of foreign advanced exhaust gas treatment technologies

Treatment of a wide variety of organic waste, different characteristics, commonly used with water spray, condensation, absorption, combustion, catalysis, adsorption method. Catalytic combustion method: the exhaust gas is heated to 200 ~ 300 ℃ after catalytic bed combustion, achieve the purpose of purification. The method of low power consumption, high purification, no secondary pollution, easy process is simple to operate. Suitable for high temperature and high concentrations of organic waste gas treatment, does not apply to low-concentration, high winds amount of organic waste gas treatment. Assay: (1) direct assay: organic gases directly through activated carbon, can reach 95% of the purification rate, simple equipment, low investment, easy operation process painting exhaust contrast treatment, but need to be changed frequently activated carbon for low concentrations of pollution was carried on without recycling occasions. (2) adsorption recovery method: organic gas by activated carbon adsorption, activated carbon saturated with hot air desorption regeneration. Activated carbon regeneration and exhaust gas catalytic decomposition of organic carbon adsorption saturation, the use of hot air inside the activated carbon desorption of organic waste out of the desorption process by controlling the flow of organic waste can be 10-20 times the concentration of concentrated desorption flow through the catalytic bed electric heating device is provided for heating to about 300 ℃, in the catalyst light-off, the catalytic decomposition process purification efficiency up to 97%, generating CO2 and H2O decomposition and release large amounts of heat specialist waste processing factory which, through the heat catalytic decomposition of the heat exchanger portion of the bed and then used to heat the desorption of the high concentration of gas, in addition to a portion of the heating outdoor air, is used as activated carbon desorption gas desorption ~ catalytic decomposition generally achieve self-balancing process must start electricity heater for about 1 hour. After reaching thermal equilibrium electric heating device can be turned off, so that by the exhaust gas treatment system regeneration of organic solvents as fuel to produce energy on the basis of no external enable regeneration process to achieve self-balancing cycle, dramatically reduce energy consumption, and no secondary pollution in , the whole process of adsorption and catalytic decomposition realized by PLC automatic control. (1), the use of activated carbon adsorption concentrated portfolio + catalytic decomposition process, the entire system to achieve purification, desorption process closed loop, compared with recycling organic gas purification device without additional feature such as compressed air and steam energy, with no need of cooling towers and other additional equipment during operation and no secondary pollution gas processing, low investment in equipment and operating costs; (2), the selection of a special honeycomb shaped activated carbon as an adsorbent material, because of its large proportion of activated carbon fiber strip ratio of 8-10 times The adsorption of organic solvents before regeneration can reach 29% of the total weight of activated carbon, has a long life, a variety of processes running resistance low adsorption system of organic waste treatment, high purification efficiency characteristics; (3), using high-quality precious metal palladium, platinum loading In the ceramic honeycomb catalyst, the catalytic decomposition rate of 97%, long life of the catalyst, the decomposition temperature is low, desorption short warm-up time, low energy consumption; (4), the use of the system, equipment operation, the operation control microcomputer concentrated achieve full automation, security and stability during operation, and reliable; high-energy ion gas treatment technical drawings, gas processing, the introduction of foreign advanced exhaust gas treatment technologies provided by Environmental Science and Technology Co., Ltd. Shandong SafeNet. SafeNet Shandong Environmental Protection Technology Co., Ltd. (www.caftec.com.cn) strong, credible, Shandong Weifang exhaust gas treatment equipment industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead the Environmental Protection Technology Co., Ltd. Shandong SafeNet and you hand into the brilliant, for a better future!