Waterproof coating for sale, Scotiabank (certified), Changzhou waterproof coating

 Polymer modified bitumen membrane: the consolidation of application SBS, APP modified bitumen membrane and self-adhesive rubber bitumen membrane, wet-laid process to develop self-adhesive modified bitumen membrane color organic silicon structure dedicated waterproof coating to promote the practice and application of green roofs root barrier membrane, the positive application of fiberglass tire asphalt shingles, restrict the use of complex fetal bitumen membrane and felt paper fetal waterproof coating, prohibit the use of coal tar sand surface waterproofing membrane. Construction Technology 1, the liquid additive into a clean mixing container sale waterproof coating, and then scaled stirring slowly added to the powder, stir 3-5 minutes until the dough no generation, uniform mortar, and in operation run out of time. Recommend the use of mechanical agitation (400-500 rev / min), in order to achieve the best mixing effect; 2, with a roller, brush the paste evenly on a good brushing to handle transparent silicone waterproof coating substrates, according to the environment and Performance requirements brushing 2 or two layers above; general engineering waterproof layer thickness of 1mm, underground construction specification requirements for thickness 1.5-2mm; 3, after finishing one must wait until slightly dry solid (just sticky) later, do the second layer, which normally takes 1-3 hours, depending on the density of the base surface, and then the temperature may be. If more than 24 hours, or the coating has been cured, in which the second layer when brushing, you must first re-wet the surface with water; 4, conservation cure: from the day after the slurry brushing is recommended to use a fine mist spray water or damp cloth overlay coating 2-3 days, and then closed water test; for long-term water storage tanks should wait until two weeks after the vacancy filled with water; 5, slurry mixing good general should be used within one hour, there solidification The material is no longer available; 6, not watered stir, do not arbitrarily change the ratio of emulsion. Features 1, for a wide range: for marble, culture stone, artificial stone, cut fake stone, tiles, mosaics, stone inscriptions and other water corrosion and brick products. 2, the combined effect of good: both water erosion, but also moisture, frost, moss, wind resistance, the combined effect of pollution. 3, maintaining the original style: After using the stone or brick does not produce any color, texture, appearance change, maintaining the original style. Waterproof coating for sale, Scotiabank (certified), Changzhou waterproof coating provided by Qingzhou Scotiabank building waterproof materials plant. Qingzhou Scotiabank building waterproof materials plant (www.qzfyfs.com) Shandong Weifang, architectural coatings leader, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. Scotiabank leader in waterproof material with the staff warmly welcome all inquiries negotiations to create a waterproof material Scotiabank a better future.