Fluorocarbon coating plants, sand hung hardware appliances spraying, spraying processing

The aircraft air consumption before spraying equipment investment should pay attention to 1. users with air compressor capacity shall comply with the specification, and should as far as possible be greater than consumption. The trachea through the mouth into the trachea and shall comply with the provisions of the specification, in order to maintain a sufficient amount of intake air. 2. Air out of the compressed air through the filter into the spray equipment, which will help to ensure that the life of a pneumatic system. 3. Paint first filter, the filter should be selected according to the viscosity of the coating, the particle size, the screen is too small and not through the paint, the gun is too coarse easily blocked. The air compressor as far as possible away from the spray spot, to reduce the possibility of contamination of the compressor. 5. All airless spray equipment should be well grounded electrostatic spraying process, in order to avoid static sparks. Many factors affect the quality of the thermal spray coating, spray coating and melt the categories. Practice has proved that as long as the strict implementation of process rules, pay attention to the following technical factors, the coating quality can be guaranteed. (1) of the workpiece surface preparation ① undercut undercut means to provide a space to accommodate the thermal sprayed layer on the base material or part or worn out vehicle size. When the shaft is not usually wear, but to save labor and material coating process can be divided into further undercut, shaft head indeed manner. ② clear up that remove oil, rust, paint spraying metal processing plants, so that the surface is clean. Carbon tetrachloride is better degreasing metal spray processing, not on the part under the residual film, but harmful carbon tetrachloride, the operation should be cautious. Suitable for cleaning up oil flame baked porous castings, where oxygen-acetylene flame baking oil most commonly used. Sometimes oil to clean, to be repeated many times fluorocarbon coating plants, sand hung hardware appliances spraying, spraying processing provided by the Dongguan City, Sha Hong Hardware Appliance Co., Ltd.. Dongguan City, Sha Hong Hardware Appliance Co., Ltd. (www.dgshahong.com) is an industry leader in Dongguan, Guangdong, spraying equipment, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. Painting hung in the sand leading hardware appliances with the staff warmly welcome all inquiries negotiations to create sand painting hung hardware appliances a better future.