Ankang feeder, Alpha factory outlets (certified), feeder

Feeder works: vibration source tank feeding the exciter vibration exciter is composed of two eccentric shafts (active and passive) and Vice-being composed of gear feeder, by motor through V-belt drive axle, and then by the drive shaft gear driven shaft rotates, active and passive reverse rotation axes simultaneously, so that the tank vibration, continuous flow of materials to achieve the purpose of transporting materials. Feeder features: GZD series vibrating feeder structure is simple, feeding uniform, continuous good performance mineral feeders, centrifugal force is adjustable; subject to change and control the flow, easy to operate; eccentric vibration source, low noise, low power consumption, regulation performance, no red material phenomenon; the use of a closed-body vibration to prevent dust pollution smooth, reliable operation and long life; exciting force can be adjusted, subject to change and control the flow, easy to adjust stability; vibration motor as vibration source, low noise, low power, regulation performance, no red material phenomenon. Feeder structure is simple, reliable, easy to adjust to install, light weight, small size, easy maintenance, to prevent dust pollution when using the closed structure of the fuselage. GZD Series Vibrating Feeder simple structure, easy operation, no-run, small power consumption; you can even adjust the volume of ore; therefore has been widely used. Generally used for loose material. According to equipment performance requirements, configuration, materials should be designed to minimize the stress on the tank, and Bunker discharge port shall not be greater than the effective width of the fourth feeder, the material flow rate control in 6-18m / min. For to a large quantity of material, hopper bottom discharge at the bar should be set high enough ore board; to not impact the performance of the feeder, stopped mining board not fixed on the tank. To enable a smooth discharge hopper, silo best design for the back wall inclination 55-65 degrees. Feeder use: feeder is widely used in mining, gravel field, metallurgy, building materials, chemicals, mineral processing, mining and other industries crushing and screening production lines. Feeder works: The feeder is the use of a vibrator in the eccentric rotation of the centrifugal force, so that the screen hand, vibrators and other moving parts as mandatory continuous circle or an approximate circle movement. Materials in the car with the screen tilted screen surface for continuous throwing motion, and continuous uniform within the material sent by the spout. Feeder Features: This vibrating feeder structure is simple, stable vibration, feeding uniform, continuous performance, adjustable exciting force; subject to change and control the flow of Hanzhong feeder, easy to operate; eccentric block is excited vibration source, low noise, low power consumption, regulation performance, no red material phenomenon; the use of a closed-end well-being of the body to prevent dust pollution feeder, Alpha factory outlets (certified), feeder by Shaanxi Ming Thailand Heavy Machinery Co., Ltd. offers. Alpha Shaanxi Heavy Machinery Co., Ltd. (www.sxmingtai.cn) (www.sxmingtai.cn) is Xi'an, leading crushing grinding equipment, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, the maximum limits to meet customer needs. Alpha Heavy Industry leader in the staff warmly welcome all inquiries negotiations to create a better future for Alpha Heavy.