Silica gel plates 1MM | Tianjin preferred silicone tube in plastic Oda | Zhangjiakou silica gel plates

Oda [in plastic to recommend the star product - insulated rubber sheet] Appearance: 1) scar depth and height does not exceed the sheet thickness tolerances. 2) bubbles per square silicone sheet 1MM, an area of ??less than 1cm bubbles not more than 5, the distance between any two bubbles is not less than 40mm. 3) impurity depth and length does not exceed 1/6 of the thickness of the plastic sheet. 4) missing or spongy edge width not exceeding 10mm, length does not exceed 1/10 of the total length of the plastic sheet. 5) no cracks. Oda [in plastic to recommend the star product - insulated rubber sheet] Hardness:. A): 55-703 tensile strength and elongation at break: 1) Tensile strength (Mpa) ≥5.2) Elongation at break . ≥250% 4 elongation (150%) permanent deformation ≤25% 5 hot air aging (70 ℃ * 72h) 3) the tensile strength decreased water absorption rate ≤30% 6 ≤1.5% silica gel plates 1MM |.. Tianjin silica Preferred plastic tube in Oda | Zhangjiakou gel plates from the Tianjin Oda Plastic Products Limited. Plastic Products Co., Ltd. of Tianjin Oda (www.tjzad.com) is Tianjin, industrial rubber (milk) Polystyrene leaders, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, the maximum to meet customer needs. Oda leader in plastic with the staff warmly welcome all inquiries negotiations to create the plastic Oda a better future.