How to rescue passengers trapped elevator car

 Passengers trapped in the elevator car to rescue passengers trapped in the elevator car, rescue procedures are as follows: (a) arrive at the scene of the rescue professionals, should first determine the location of the elevator car and then implement the rescue. (B) above or below the floor of the elevator car more than 0.5 meters, should perform disk drive rescue program, and then follow these procedures to implement the rescue: 1. Determine the location of the elevator car; 2. Turn off the main power elevators; 3 Open the elevator with the emergency key to unlock the door and check the car door; 4. divert passengers to leave the car to prevent passengers falls; 5. Reconnect the elevator landing door, car door shut; 6. In the elevator at the entrance to the elevator settings to disable signs. In the event of a fire or other emergency, emergency measures should be taken to the following: (a) immediately alert the fire department. (B) there are pressing the fire button Fire features an elevator, the elevator into the fire the fire running state for firefighters to use; for no elevator firefighting capabilities, should immediately headed for the elevator to the first floor and cut off the power supply or the elevator stopped the fire has not yet spread to the floor. After the passengers to leave the elevator car, the elevator stops running into state hands closed elevator landing door, car door, lift off the main power. (C) In the hoistway or elevator car in the event of fire, the ladder must immediately stop the flow of passengers to evacuate, turn off the power, with a fire extinguisher. (Four) have shared the elevator hoistway fire should immediately lift the remaining fires stopped yet far away from the fire spread area, or to the firefighters for fire use. (5) When a passenger elevator www.hbdt.net/ Wuhan adjacent buildings fire, the ladder should be stopped in order to avoid power outages caused by fire elevator entrapment accidents.