Waterborne peritoneal plastic technology transfer, technical training, technical consulting, technology services

Cold water paste peritoneal glue technology (solid content of 12% -40% of any transfer) --- Following a low-cost high-quality security door styrofoam new technology after another giant advent of a successful product range of applications:.  Beijing Charcot Court Technology Development Center (more items, please visit: http: //www.lkxtg.com) adhesives expert group after nearly a year of technical research, in the original cold water paste on the basis of peritoneal glue technology has made a major breakthrough, completely changed Peritoneal traditional rubber production process, not only reduce production costs, improve product quality, the use of this technology to produce products from one ton reactor per day (8 hours) to produce 1 ton of plastic, was replaced every eight hours producing three tons of plastic, Solid content from 12% to 40% of any adjustment, greatly enhance the competitiveness of products are mainly applied to the composite biaxially oriented polypropylene film, polyester film and color printing paper. And a variety of high-end print paper and gold, Silver, boxes and plastic bags and other applicable composite cover hardcover books, product publicity posters, brochures, etc.  Second, characteristics:  1, non-ethylene - vinyl acetate emulsion, cement is good for film and printing ink.  2, composite materials brightness, and pattern fidelity, never change, no mist cloud point.  3, composite materials loyal to color, ink color does not destroy the object.  4, can be adapted to bronzing, India, Indian silver, composite materials rolling line, smashing irregularities are not affected.  5, green products, non-toxic, non-polluting, non-flammable non-explosive.  6, without heating, with plastic per square meter is about 10 grams, process adaptability, long standby time, long-time anti-skinning.  7, freeze-thaw stability, winter use is not affected.  8, this product is suitable for both old Fumo, also applies to the new laminating machine.  Third, the production conditions:  plant 50m2 ~ 80m2, one reactor (with a heating device), worker: 2 to 5, generally measuring instruments. Cost per ton of about 1,200 yuan to 4,500 yuan, the market price of more than 4500 yuan --8500 yuan.  four basic parameters: Item Index indicators of pH 6.5 to 7 solid content of 12 to 40 viscosity of 160 to 230 storage period ≥6 months Appearance white emulsion Fifth, use:  1, this glue evenly coated on the surface to be peritoneum, directly pressed paper stick together, rolling paper placed depending on the amount of plastic film to determine the specific circumstances. Pressure to the glue is not pressed out appropriate.  2, after winding placed around 15min begin slitting.  3, after use, wash machines and tools with water.  six, technical service mode:  1, providing up to a full technical formula, process information, on-site training, and learn.  2, technology transfer, training costs 26,000 yuan, donated solvent-based adhesive technology.  3. while learning water-based adhesive and dry film adhesive two techniques can offer 15 - 20%. Seven Special Note: 1. There has been some customers, Anhui, Jiangsu, Shandong, Hebei, Sichuan confinements in aqueous and oily peritoneal peritoneal glue glue, there were technical problems can not be solved; and later to re-learn my unit waterborne peritoneal plastic (send Peritoneal oily glue), the current production of 25-28% solids pink cover 38 percent better than the original effect. Confinements units available to manufacturers of field trips and learning. 2. For now producing water peritoneal glue manufacturers, may be given a 10% discount. Technical Tel 010-52693830 15311210332 5,269,383,113,301,269,298