Shangqiu tile adhesive price

 Categories and uses: 1, ordinary type (commonly known as: ceramic tile adhesive): Suitable for indoor, wall ground paste of ceramic tiles, waterproofing membrane can be used for wiping the surface protective layer. 2. Enhanced (commonly known as: Wave of brick binder): Suitable for indoor, wall pasted ground wave of bricks, tiles and other whole body. 3, strong type (commonly known as: Strong powder): Suitable for indoor, wall thin paste of ground marble, large pieces of stone, granite, poly board, extruded sheet, rock wool panels. Environment: indoor and outdoor wall kitchen floor bathroom sink cold regions Primary treatment: Determine solid substrate formation, without hollowing, basal surface clean, no oil, from film, dust and loose material and other stains. For primary absorbent big wet with water. Construction Technology: 1, the binder powder is removed from the plastic bucket of cold water in the barrel into the clean, to the barrel body marked lines. (Per 20 kg bag of about 5.5 liters of water plus binder) 2, the binder powder into the barrel, with an electric mixer stir to evenly without caking. 3, first with a special scraper full batch of mortar base surface 3-5mm thick, then use a tooth scraper side to pull straight or S-shaped stripes (scraper plane and grassroots planes intersect at a 45 degrees to 60 degrees , suggested the use of different deep tooth scraper according to tile size). 4, tiles do not need soaking, just stick to the order and compacted to a wall or floor. 5, tile position can be adjusted within a specified period of time in order to achieve the best results, before the glue to dry to remove the excess glue. Note: 1, generally without soaked brick panels of highly absorbent tiles or grass roots or water first and then a few minutes soaking wet. 2, low initial strength, 7d can reach the intensity of use. Within 24h should avoid heavy on the tile surface. 3, winter antifreeze is available, may be applied within -10 ℃. Specifications and storage: 1, Specification: 20kg ± 0.05kg 2, should be stored in a dry and ventilated place