Prescribing tailored for you all kinds of Edam Revolving Door

Two stand (also called Fair box) is also mounted on the rotating assembly aluminum ring and frame composed of two channel. Stand up and down on the channel is welded into the frame. Stand down by the channel welded into the frame, the frame with screws on the channel, the leaf skeleton with two booths booth arc doors, doors and gates fixed connections, thus forming a whole booth. Skeleton below and under the skeleton inside the booth above the aluminum panels are installed inside the booth seat decorative panels. Activities doors hinged connection with the booth, and add a pulley and locks. Booth by Booth skeleton arc booth door, stand fixed doors and gates composed booth activities. Stand upright circular door by four curved aluminum frame and horizontal frame composed of four vertical stand arc door frame and curved horizontal frame composed of aluminum, together with a screw connection, the angle between the two outside vertical centerline of the box 60 °. The two outermost vertical frame with rubber protective cover, protective cover to prevent scratches pedestrian turnstile rotation. Arc is equipped with three glass doors, glass facade frame and horizontal frame glass tank with a rubber seal seal. Brush the outside of the arc Gate, revolving doors and curved walls for sealing. Fixed door from the left border of the booth, right border, the border cross frame and the lower horizontal frame composition consisting of glass and rubber seal. Frames for aluminum, door frames by bolting into one, after the booth door fixed with screws to assemble the whole stand down on the skeleton.