Mitsubishi AC contactor S-N10

 Liu town Xiangshan Industrial Zone, Yueqing, Yueqing City, State 27-29 Cheung Electric Co., Ltd. Contact: Roger Manager Mobile: 18605871339 Tel: 0577-27773605 QQ: 694967070 E-mail 694967070@qq.com (Holidays round) ● SN Series Magnetic contactor: AC contactor is mainly used for frequency 50Hz and 60Hz, rated voltage up to 1000V, rated current up to 800A of the power system and breaking the circuit, with appropriate thermal overload relay or electronic motor protection relays combined into a starter is to protect the operation of the device may be overloaded. ▂▂▂▂▂▂▂▂▂▂▂▂ ● Mitsubishi AC contactor main structure: the main contact normally open contacts, and often two pairs of auxiliary contacts normally open contacts and normally closed contacts, the contacts are often small as relay with the main circuit. AC contactor contacts made from silver tungsten alloy with good electrical conductivity and high temperature ablative. ▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂ ● AC contactor power moves from the exchange the magnetic field generated by the coil with core electromagnet core consists of two "mountain" shape the young quartet built silicon, one of the fixed iron core, a coil, the operating voltage can be a variety of options. In order to make the magnetic stability, core plus side pull short-circuit loop. AC contactor after the loss of power, relying on spring return. ▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂ ● The other half is the active core, constructed and fixed core Like to drive the main contacts and auxiliary contacts are closed off. More than 20 amps interrupter contacts plus a cover, using electromagnetic force generated when the circuit is opened, quickly pull off the arc and protect joints. ▂▂▂▂▂ ● certification standards IEC60947-1: 2000 GB / T14048.1-2000 "low-voltage switchgear and control equipment General" IEC60947-4-1: 2000 GB14048.4-2003 "low-voltage switchgear and control voltage electromechanical contactors and motor starters "IEC60947-5-1: 2000 GB14048.5-2001" low-voltage switchgear and control equipment, control circuit devices and switching elements of the first part of the electromechanical control circuit devices "China Compulsory Certification" CCC "logo ▂▂▂▂▂ ● Working conditions 1. Ambient temperature: Standard 20 ℃, -10 ~ + 40 ℃ (no condensation, no freezing) 2. Altitude: not exceed 2000m; 3. Relative Humidity: 45% 85% RH; 4. atmospheric conditions: There should be no danger of an explosion caused the media, nor will corrode metal and damage the insulation of the harmful gas and conductive dust; 5. Impact: 10 ~ 55Hz 19.6m / s2 or less; 6. Vibration: 49.0m / s2 or less; 7. Storage temperature: -30 ~ + 65 ℃. ▂▂▂▂▂▂▂▂▂▂▂ Mitsubishi contacts S-N10 Mitsubishi contacts S-N11 Mitsubishi contacts S-N12 Mitsubishi contacts S-N18 Mitsubishi contacts S-N20 Mitsubishi contacts S-N21 Mitsubishi contacts S-N25 Mitsubishi contacts S-N28 Mitsubishi contacts S-N35 Mitsubishi contacts S-N38 Mitsubishi contacts S-N48 Mitsubishi contacts S-N50 ??Mitsubishi contacts S-N65 Mitsubishi contacts S-N80 Mitsubishi contacts S- N95 Contactor Mitsubishi S-N125 Mitsubishi Mitsubishi S-N150 Contactor Contactor Contactor Mitsubishi S-N180 S-N220 Mitsubishi contactor S-N300