How is the maintenance of bar code scanning equipment

Handheld terminals [Speedata think BHP Billiton, 400-040-5565] is a leading manufacturer of handheld bar code scanning intelligent terminals. Data collection has a profound intelligent terminal product development and function customization techniques. Focus on the product of the results, and provide excellent service. Barcode scanning equipment maintenance: 1. Clean the exterior shell. In the usual course of doing housework, we all know that if you directly with a damp cloth to wipe the surface a lot of dust, the surface will be thrown flowers. So, usually acquire a piece of dry cloth swabbing again, and then a damp swabbing, Shell cleaning barcode scanning equipment, too, but which is very particular about the use of cloth, preferably a soft cotton cloth. If they pass the two after swabbing, there are stains on the shell, then, then we can use on a damp cloth dipped in some detergent to clean. Clear clean, with a clean, damp cloth to wipe the stained detergent place on repeated several times so that our housing will be very clean. 2. Internal parts cleaning internal optical components and transmission. Let me first take internal optical components clean, we can open the scanner's flat glass, bar code scanning equipment to clean the inside of the optical components. In general, the housing and the base is a bar code scanning device card together, it is not need a screwdriver can be easily disassembled in optics, we have to focus on cleaning the bar code scanning equipment fluorescent tubes: with a cotton ball dipped in distilled water and then squeeze out Push on cotton (to ensure that the wiping process there will not flow out) and gently wipe back and forth on the tube. Since the optical components more sophisticated, so when these devices for cleaning, action to light, and remain stable. After cleaning the interior of the optical components, the next step is to clean our gear, this gear is generally concerned that the slide bar barcode scanner bar code scanning equipment on the transmission mechanism, clean the slide bar is another one focus. Usually when there is noise in the bar code scanning equipment during operation, it is likely that the issue slide bar. At this point, we can find some lubricant evenly coated slide bar to improve lubrication of the mechanical transmission mechanism. 3. flat glass plate clean. Done after the first step, after the other shell basically dry, open bar code scanning equipment shelters, aligned with the plane of the glass blower to blow a few, will be attached to the surface of the dust, "sent packing." Who can not blow away the stains on To use glass cleaning, then use a soft, dry cloth to wipe clean the glass panel due to clean or not directly related to the quality of the scanned image, so when we clean the panel must be careful, not all hands article comes from.: www.geofanci.com