Manganese sand filter tank diameter, Song Xin manganese sand filter site (certified), manganese sand Qingtongxia

 Backwash water is cleaned by a certain intensity, so remove impurities in the filter layer for the purpose of cleaning methods. For manganese sand filter, the backwash cleaning is a very important step, it can remove impurities in manganese sand filter formed during filtration, manganese sand filter to restore and clean. It is not longer the backwash time, the effect of cleaning the greater good? The answer is no. The results show that manganese sand filter backwash shortest treatment for five minutes aquaculture manganese sand, no longer than 10 minutes, and also the backwash time can not be too long, which is why? Manganese sand filter counter washing time is based on what the deciding factor? We all know that in addition to iron and manganese sand filter relies mainly two reasons, one is iron manganese sand filter manganese dioxide and water react, one is the so-called The role of the membrane. This layer can remove iron sulfur active membrane structure is relatively loose, if the backwash time is too long, then it is easy to destroy a long time in the proportion of manganese sand wash, so filter backwash should not destroy the filter surface Activity on the film for the degree, preferably 5-10 minutes time. Otherwise, not only from the backwash of purpose, but also reduce iron and manganese sand filter effect, the final impact water quality, water quality caused serious deterioration after filtration. Because the active filter will have a more serious consequences after being destroyed - reduced iron and manganese sand filter effect, affecting water quality. So manganese sand, manganese sand filter backwash time without damaging the surface of the active manganese sand filter membrane as standards by the decision. Clarification of manganese sand filter operation and management of the basic requirements of the pool are: ground testing, ground observation, ground regulation, and in particular to seize the appropriate dosage, mud timely these two links. Manganese sand filter clarifier is a special form developed on the basis of a settling tank in sedimentation tanks. The main features of manganese sand filter are: manganese sand filter structures completed within a mixed reaction, while the precipitation process; alum has been formed to make recycling or in a suspended state continues to play a role. Dosing appropriate: that cohesion agent dosage should be adjusted according to changes at any time manganese sand filter into the water filter and water quality manganese sand filter tank must not neglect the price, in order to ensure the water desirable. Manganese sand filter filter sludge timely: that is the basis of practice to master the production of mud and mud time period, that is, preventing sludge turbidity is too high, but also to avoid a lot of the activity of the sludge was taken out of the pool, the lower water quality. Do a good job as long as the timing and content of these two aspects in accordance with the provisions of manganese sand filter clarifiers for testing, adjusting, do all the work management and maintenance, water clarifiers effect you can get the basic guarantee. Manganese sand filter tank diameter, Song Xin manganese sand filter site (certified), Qingtongxia provide manganese sand filter by Gongyi City Song Xin Industrial Limited. Gongyi City Song Xin Industrial Co. filter (www.sxlc.com) is Zhengzhou, cleaning, cleaning equipment leader, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs . Song Xin filter in leadership with the staff warmly welcome all inquiries negotiations to create Song Xin filter a better future.