K11 waterproof coating

Product Description flexible type K11 waterproof slurry is a polymer-modified cement-based waterproof coating, made from high quality cement sand and unique and very active with a variety of polymer modified polymer emulsion formulation composition, which greatly improved the water adhesion layer, water retention, flexibility, while gaining the upper hand the wear waterproof layers, durability, permeable, non-toxic, tasteless, non-polluting, safe and simple construction, is an ideal green waterproof materials. Product Features 1 in the wet base construction; 2 easy to operate, can be used only on-site mixing; 3 good abrasion resistance, good adhesion to dryness can tile adhesive variety; 4 waterproof layer to prevent moisture, salt contamination, inhibit mold growth; 5 coated with a waterproof layer of concrete remains good ventilation; 6 non-toxic and can be used, such as ponds and fish ponds; product construction with clean tap water wetting the base surface, but not the base surface have clear water. Primary treatment: For depression more rough surface, thick cement mortar tune with knife batch batch level, attention should not be too thick batch file 'tune ?? material: with stirrer stirring the powder added to the liquid feed, so that the powder evenly dispersed in the liquid feed, mixing time is about 3min ?? painted cover: a good tune with a brush cement mortar evenly coated on the substrate, each coated with a thickness of about 0.2 to 0.4 mm over. Surface Patch: cement mortar dilute with a brush repeatedly brushing defect waterproof layer waterproof layer to repair and strengthen the weak link. Closed water test: After 48 hours of construction can be closed water test, if the environment is wet or winter, coating drying time is slow, closed water test can be postponed. Scope 1. solid substrates made of concrete, brick, pre-cast body, composed of lightweight bricks; 2. indoor and outdoor building walls, floors. Such as: tunnels, bridges, basement, kitchen, balcony, bathroom, swimming pools, reservoirs, etc.; 3 precast body seam sealing, back strip interface, structural joints, surrounding spout, lightweight porous masonry. (carcass reinforcement treatment is recommended); four local reinforcement treatment, such as: root canal mouth and other parts of the corner. Reference to the amount waterproof (again) 0.6㎜ thick, about 0.5 kg / m waterproof (twice) 1.2 mm thick, about 1.2㎏ / m packaging, storage in transportation (see Universal K11) Tel: 13450429674QQ: 3136105345