6KV / 10KV voltage capacitors special series reactors

An overview of the compensation capacitor capacitive reactive power, they often will be the harmonic currents, inrush current and operate over the impact of voltage, causing damage and power factor capacitor reduces, which requires front-end load capacitor series reactor, for harmonic suppression and absorption, protecting the capacitor, to avoid affecting the impact of current and voltage harmonic voltage and current, and improve power quality improve system power factor capacitors prolong life, to ensure the safe operation of the power grid. Second, product characteristics 1, the product is divided into a three-phase, single two, as the core dry-2, using high-quality cold-rolled silicon steel core, the high-speed punch punching, with a small burr, uniform rules, neat and beautiful laminations to ensure that the reactor is running low temperature rise, low noise performance. 3, using high-quality insulated wire coil, winding through a dedicated machine, with smooth, good appearance advantages. 4, the reactor assembly process, all the clamps embalmed, tube clamps using non-magnetic material, and after pre-drying, vacuum invasion paint, heat drying curing this process, so that the reactor coil and core firm to become one , greatly reducing the running temperature and noise. 5. Reactor Dimensions reference standard cabinet sizes design, small wiring aspect, greatly saving the user cost investment. Third, the use of environmental conditions 1, no more than 2000 meters above sea level. 2, Operating ambient temperature -25 ℃ ~ + 45 ℃, relative humidity less than 90%. 3, around the non-harmful gases, flammable and explosive materials. 4, the surrounding environment should be well ventilated, as installed in the cabinet should be installed ventilation equipment. Fourth, the performance parameters 1, temperature rating to F grade (155 ℃); normal operation, dry core reactor core temperature of not more than 85K, the coil temperature rise of no more than 95K. 2, the reactor can run long at 1.35 times the rated current. 3, the reactor is not greater than the national standard noise. 4, the reactor pressure levels consistent with JB5346-1998 "series reactor" requirement.