UHMWPE coal bunker liner installation considerations

Several questions Shengtong company polymer when coal bunker liner installation to note: 1, if connected with the coal bunker liner plate, required on the coal bunker liner holes drilled creative writing, using a special curved steel gaskets directly welding can also be welded to the steel bolt, and then they feel drill holes in the liner, with curved washer, nut or countersunk screws connecting link. 2, if the coal bunker liner connected with cement materials, respond to inspect the silo, bunker or concave liner for a prominent place should be treated from the formation, thorough clearance processing, in order to prevent the coal bunker liner is not installed tight or off board to happen. 3, coal bunker liner installation should be worked out before the actual situation of the silo installation process, complied with during installation. Install the front liner on the bottom cut cutting deal with playing 45 ° bevel seams between the board and the board should be "on the poor under the" way to install lap; silo material surface and the horizontal angle greater than 68 ° You can achieve the overall activity throughout the body positions to avoid or reduce the retention area. 4, coal bunker liner installation needs differ according to local weather, hopper shape, different size and other factors.