Guangyuan sided adhesive manufacturer

 Guangyuan sided adhesive 3M double-sided adhesive manufacturers are widely used in computers, mobile phones, telecommunications, household appliances, audio-visual equipment, automobiles and other products should be applied according to the product and the environment need to choose, you can refer to the following instructions: 1, non-woven Burkina sided adhesive material properties and processing, and the general long-term temperature 70-80 ℃, short-term temperature 100-120 ℃, thickness is 0.08-0.15MM, suitable for nameplates, plastic stuck to, automobiles, mobile phones, appliances, sponge, rubber, signs, paper products, toys and other industries, home appliances and electronic equipment parts assembly, display lenses. 2, substrate-free double-sided adhesive with excellent adhesion effect to prevent loss and excellent water resistance, good processability, good temperature resistance, short term temperature 204-230 ℃, the general long-term temperature 120-145 ℃, thickness is 0.05-0.13MM, suitable for bonding nameplates, panels, decorative pieces. 3, PET substrate double-sided adhesive temperature resistance, shear resistance, the general long-term temperature 100-125 ℃, short-term temperature 150-200 ℃, thickness is 0.048-0.2MM, suitable for nameplates, LCD , decorations, decorative pieces bonding. 4, double-sided adhesive foam substrate has a soft, paste clothes, good initial tack and holding viscous, solvent resistance and UV resistance is good, general thickness 0.4-1.0MM, short-term temperature 130-150 ℃, long-term resistance temperature 80-93 ℃, applicable to air conditioners, office furniture, bonding communications products, can replace the screws designed to make the product more beautiful. 5, hot melt adhesive film has a good consistency, uniform thickness of the adhesive, solvent free, easy processing, many objects have good adhesion, thickness of 0.1MM, color is translucent / amber, hot melt softening temperature of 116-123 ℃. Suitable for nameplates, plastic, metal pieces of adhesive; the uneven surface adhesion can be obtained good results, we recommend that the initial bonding conditions: temperature 132-138 ℃, bonding time of 1-2 seconds, the pressure was 10 -20 pounds / square inch. Use of 3M double-sided tape is widely used in computers, mobile phones, telecommunications, home appliances, audio-visual equipment, cars and other products, should be selected according to the application of the product and the environment. Use, storage requirements at the time of double-sided adhesive 3M adhesive, adjustment following manner, obtain enhanced bonding effect: 1, the first surface of the adhesive must be cleaned and dried with a cloth dampened with a general recommendation 1: 1IPA (isopropyl After alcohol) with a mixture of water, wipe the surface clean until the surface is completely dry. 2, after the solvent is dried to be cleaned, the adhesive tape bonded to the surface of, or otherwise subjected to roll about 15PSI (1.05 kg / cm) of the pressure, so that the effective bonding. 3. peel off the tape release paper, and then will be required to fit the material paste, the same pressure to impose 15PSI to effectively fit. To remove air bubbles, should increase the pressure to the upper limit of the article can withstand. 4, paste ideal temperature for 15-38 ℃, do not lower than 10 ℃. 5, adhesive tape, should be fit after the end of the first, and then ease the pressure to the other side, in order to reduce the probability of bubbles generated. 3M double-sided adhesive suitable environment requires storage: a temperature of 19-23 ℃, humidity of 40-60%.