ush fluorine rubber seals _ East morning plastic (certified) _ fluorine rubber seals

 Temperature range features / characteristics of excellent heat resistance and cold, but the weather resistance, alkali resistance and water resistance worse than other rubber. Fluorine rubber (FKM) O-rings -40 ~ 240 ℃ has a strong heat resistance, excellent oil resistance and chemical resistance. Heat resistance, cold resistance, chemical resistance and excellent weather resistance, low coefficient of friction seal one of the main materials used y fluorine rubber seals, but less flexible. Viton has excellent mechanical properties. 26 fluorine rubber with strong general between 10 ~ 20MPa, elongation at break of between 150 to 350 percent white fluorine rubber seals, tear strength between 3 ~ 4KN / m. 23 fluorine rubber strength between 15.0 ~ 25MPa, elongation of 200% to 600%, tear strength between 2 ~ 7MPa. Generally, fluorine rubber seals, fluorine rubber at high temperature compression permanent deformation, but if the conditions are the same, the same time as the compression from 150 ℃ under permanent deformation, the small and neoprene than 26 fluorine glue to a large, 26-type fluorine rubber compression 200 ℃ × 24 hours is equivalent deformation butadiene rubber at 150 ℃ × 24 hours compression. ush fluorine rubber seals _ East morning plastic (certified) _ fluorine rubber seals provided by Plastic Products Co., Ltd. Junan East morning. Junan East morning plastic products Limited (www.dcsjzp.com) (www.dcsjzp.com) Shandong Linyi, rubber mold leaders, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, the maximum limits to meet customer needs. In East morning plastic leadership with the staff warmly welcome all inquiries negotiations to create the East morning plastic a better future.