Underwater aerator price / jet aerator manufacturers

Principles and use water jet aerator diving submersible pumps produced by forming a high-speed flow through the nozzle, a negative pressure of the intake air around the nozzle, the mixing chamber is mixed with water to produce water vapor mixing flow in the horn of diffusion tubes, high-speed jet out of many bubbles entrained flow vortex agitation in the larger area and depth of the waters, complete aeration, and its shaft power does not change with the dive depth changes, intake air can be adjusted. Because of this, diving jet aerator can be varied in a larger application pool level. Main features: 1, submersible jet aerator compact, small footprint, easy installation. Aerators by submersible sewage pumps, aerators, and the intake pipe of three parts, compact, small footprint; in addition, two aerators provide installation, easy to install, easy to maintain. 2, diving jet aeration aerator high efficiency, wide range of applications. Because of its high-speed jet flow pattern, liquid gas mixture sufficient oxygen absorption rate, high power efficiency. High efficiency than conventional aeration tank 3 to 4 times, aeration time can be significantly reduced, and for a variety of wastewater treatment, including the plug-flow aeration tank, aeration tank mix, extended aeration tank, oxidation ditch, oxidation ponds. 3, diving jet aeration system is simple, high reliability. Without blowers and other equipment, the system is simple, in addition to inhale estuary, and the rest are run into the water, low noise; aerators use special submersible sewage pump with cutting, efficient non-clogging, safe and reliable equipment, and long service life. 4, diving jet aerator investment and operating costs low. Because jet aerator is suitable for deep aeration tank, reducing the footprint, the system is simple, saving investment costs, high processing performance, operating cost savings. Scope: QSB series submersible jet aerator is feedwater pretreatment and biological wastewater treatment process in special aeration equipment for the aeration settling basin, pre-aeration tank, oxidation pond aeration and agitation etc; diving jet aerators can also be used for breeding pond aeration and landscape water conservation; submersible jet aerator process can also be used for water front in addition to iron, and manganese in the water can also be used for high-rise buildings water cycle process. Applicable conditions: QSB type deepwater submersible self-priming jet aerator can be under normal continuous operation under the following conditions: 1, the maximum medium temperature does not exceed 40 ° C; 2, PH value of the medium at 5-9; 3, medium density does not exceed 1150kg / m3. Note: The table of intake air and oxygen capacity under standard test conditions (20 ° C water temperature, pressure 101.325kPa), aerators diving depth 3m, test medium is water. In moderate sewage, gas capacity can be increased as the design basis coefficient 0.85. Selection and installation: When diving jet aerator need our help selection, the user should provide pool type, data media properties, the required amount of intake air, diving depth, so the company designs and delivers high-quality equipment, better to meet the needs of users. QSB type installed in the form of self-priming deepwater submersible jet aerator has auto and mobile two. Auto-mount is the aerator and a dedicated base is fixed at the bottom of the pool, ancillary support block installed in the top of the pool, so that the two are connected by rail, submersible pump bracket coupled with a specific decline in the end after a good seat along the rail exports position, self-respect through the pump, automatic coupling and sealing. Auto-installation without installing or maintenance personnel to enter the sump pump to lift and install. Mobile deepwater installation is self-priming submersible jet aerator installed in the bottom of the pool, its own weight positioning, with the installation location can be varied, flexible, and low cost.